| Quick Details |
| Size of atomizing ||20|
| Place of Origin ||CN;GUA|
| Brand Name || OURS ULTRASONIC |
|customized|| Acceptable for Piezo Ultrasonic Transducer for cleaning |
|Feature|| Long Life Low Cost |
| Product name || ultrasonic mist maker atomizing transducer |
| Water Rate ||4500ML/H|
| After Warranty Service || Video technical support |
| Local Service Location ||none|
| Showroom Location ||none|
| Applicable Industries ||Hotels|
1.7mhz 250W DC48V Water Mist Spray Industrial Humidifier Transducer
The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:
1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.
2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.
3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.
4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.
5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.
6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.
7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.
8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.
The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:
1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.
2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.
1.The atomizing capacity is related to the power supply voltage, power supply current, water temperature, water quality, water level and air flow. The fog size is based on test data obtained from our standard test environment.
2.Water level is the vertical distance from the surface of the shell to the surface of the water.
3.The atomizer with working voltage working current will be increased slightly, slightly with increasing temperature.
4.Water quality will affect the identification of water shortage protective switches, and recommend the use of clean tap water.
5.Generally, the conductivity of clean tap water is 120-250 US/CM, the conductivity of pure water is 5-15US/CM, and the specific conductivity is determined by the local water quality.
6.Pay attention to the water quality can not be corrosive, easy to rot the shell; water can not contain alkaline, oily substances, will reduce the amount of fog products.
7.The product cannot be connected to the ground when it is installed (because the product shell itself has positive electricity)
1.7mhz New Product E Cigarette ultrasonic wave atomization transducer for Ultrasonic Atomizer Disc Plate