| Quick Details |
| Size of atomizing ||20|
| Place of Origin ||CN;GUA|
| Brand Name || OURS ULTRASONIC |
|customized|| Acceptable for Piezo Ultrasonic Transducer for cleaning |
|Feature|| Long Life Low Cost for Piezo Ultrasonic Transducer for cleaning |
| Product name || ultrasonic mist maker atomizing transducer |
| Water Rate ||4500ML/H|
| Applicable Industries || Home Use |
Packaging & Delivery
- Selling Units:
- Single package size:
- 12 x 15 x 12 cm
- Single gross weight:
- 10 kg
40khz/77khz/100khz/170khz Ultrasonic Transducer,Multi Frequency Transducer for cleaning
1.7mhz ultrasonic mist maker atomizing transducer ceramic humidifier 230W
The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:
1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.
2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.
3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.
4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.
5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.
6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.
7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.
8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.
The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:
1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.
2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.