1500W 20KHZ Factory Produced Ultrasonic Bath For Extraction

Introduction to the ultrasonic cleaning machine vibrating rod:

Ultrasound refers to electromagnetic waves with a frequency of about 20 kHz to 50 MHz. It is a mechanical wave that requires an energy carrier—a medium—to propagate. There is an alternating period of positive and negative pressure during the transmission of ultrasonic waves. At the positive phase, the molecules of the medium are squeezed to increase the original density of the medium. At the negative phase, the molecules of the medium are sparse and discrete, and the density of the medium is reduced. In other words, ultrasound does not polarize the molecules in the sample, but generates sonic cavitation between the solvent and the sample, leading to the formation, growth, and burst compression of bubbles in the solution, thereby dispersing and increasing the solid sample. The contact area between the sample and the extraction solvent increases the mass transfer rate of the target from the solid phase to the liquid phase. In industrial applications, the use of ultrasound for cleaning, drying, sterilization, atomization and non-destructive testing is a very mature and widely used technology.

The ultrasonic vibration rod generates radial vibration to the rod body through a high-power large-amplitude transducer, and generates ultrasonic waves uniformly at 360 ° near the vibration rod. Its amplitude is between the ultrasonic cleaner and the processor. Therefore, use The direction is more flexible. The ultrasonic vibrating rod can be used for cleaning any grooved body, and can be placed in any position of the cleaning tank. The volume occupied by the ultrasonic vibration rod is very small and can be used very flexibly. It is used in the interior of the reaction kettle to accelerate dissolution, accelerate the reaction and prevent scaling on the inner wall.

Features of Ultrasonic Cleaner Vibrator:

1. The stronger the ultrasonic power density, the liquid that can not be processed with low power density can be processed;

2. Multiple frequencies are available to solve every problem in various industries;

3. The material adopts GB 304 stainless steel with a thickness of 1.0MM, which is durable and resistant to high temperature;

4. South Korea imported standard 60W industrial-grade shock head, with concentrated intensity and significant cleaning effects;

5, can work continuously for a long time without interruption;

6.With generator control system, flexible operation **;

7, cleaning, emulsification, separation, homogenization, extraction, catalysis, defoaming, stirring, etc .;

8. The power output of the ultrasonic vibrating rod is not affected by load changes such as liquid level, tank capacity and temperature difference, and the power output is stable and uniform.

9. Ultrasonic cavitation is generated around the vibrating rod, and the ultrasonic energy is very evenly distributed around the rod;

10.Ultrasonic vibration rod is sealed and waterproof, safe to use;

11. The ultrasonic vibrating rod is more than 1.5 times the service life of the traditional ultrasonic vibration plate;

1500W 20KHZ Factory Produced Ultrasonic Bath For Extraction