28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter

Message

$13.00

Have chosenThere are no options selected.

Start To Order

Add To Cart Successfully!

SEND INQUIRY
28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter
28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter
28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter
28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter
28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter
28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter
28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter

28K/40K Dual Frequency Laboratory Cleaning Tank Ultrasonic Transducer Radiator Emitter

  • Item No.ARS-QXHNQ2840KHZ P8
    MOQ1 Piece
Tag  sourcing
Add Request About This Product
Max file 5MB each
If lager file please send us email

Quantity:

From $13.0012.009.00 / Piece
$13.00
You save $ -13.00
Trade Assuranceprotects your orders
On-time Dispatch Guarantee
On-time dispatch is guaranteed or you will be eligible to claim platform compensation.
Refund Policy
If the shipment is delayed or product quality differs from what are specified in the online order, you can claim for a refund.
Quick refund: If you can apply for a refund within two hours of making a payment, you will receive a refund immediately.

If you have your own design, please contact us, there will have a professional customer service to communicate with you.

Don't have your files right now?No worries, Check out our art tips for more information.

If over 500pcs, mass production will start until pre-production sample has been approved.

Est. 7 days production

02Specification

The vibrator produced by our company has low heat generation, good thermal stability, low resonance impedance, good consistency between frequency and static capacitance, and complete and smooth waveforms of frequency and impedance.
Working principle of broadband ultrasonic vibrator:
Ultrasonic waves are composed of a series of sparse and dense longitudinal waves, which propagate around through the liquid medium. When the sound energy is high enough, the attraction between the liquid phase molecules is broken during the loose half-cycle, forming a cavitation nucleus. The life of the cavitation nucleus is about 0.1μs. It can generate a local high temperature and high pressure environment of about 4000K and 100MPa at the moment of explosion, and generate a microjet with a speed of about 110m/s and a strong impact. This phenomenon is called ultrasonic cavitation. . The ultrasonic enhancement of the chemical reaction and transmission process is mainly caused by the chemical and mechanical effects of ultrasonic cavitation.

1. Ultrasonic vibrator mainly consists of several parts such as shell, acoustic window (matching layer), piezoelectric ceramic disc transducer, backing, lead-out cable, Cymbal array receiver.

2. Among them, the piezoelectric ceramic disc transducer plays the same role as the general transducer, mainly used to transmit and receive ultrasonic waves; and above the piezoelectric ceramic disc transducer is the Cymbal array receiver, It is mainly composed of lead-out cable, Cymbal transducer, metal ring and rubber gasket. It is used as an ultrasonic receiver to receive the Doppler return signal generated outside the frequency band of the piezoelectric ceramic disc transducer.

3. The ultrasonic dishwasher vibrator is actually a piezoelectric ceramic with the same frequency as its resonant frequency, which uses the piezoelectric effect of the material to convert electrical energy into mechanical vibration. Generally, ultrasonic waves are first generated by an ultrasonic generator, which is converted into mechanical vibration by an ultrasonic transducer, and then ultrasonic waves can be generated by an ultrasonic deriving device and an ultrasonic receiving device.

 

Ultrasonic Transducer classification:

A. piezoelectric chip classification: Black chip P4 series and yellow chip P8 series;

B. Frequency classification: low frequency series (17-23KHz), intermediate frequency series (25-28KHz), medium and high frequency series (33-60KHz) and high frequency series (68-200KHz);

C. Power classification: 30W series (including 35W), 50W series (including 60W), 100W series (including 80W) and other unconventional power;

D. shape classification: straight column and horn type

 

Ultrasonic Transducer Frequency selection:

The frequency of the transducer is inversely proportional to the wavelength, and the wavelength is related to the diameter of the cavity (strictly speaking, the nucleation time is longer due to the low frequency), and the diameter of the cavity is related to the explosion pressure. The higher the general frequency, the smaller the wavelength, the smaller the diameter of the cavity, the lower the explosion pressure, but the higher the density of the cavity, the better the permeability.

 

Based on the above principles:

Low frequency (17 ~ 23KHz): When the dirt of the cleaned material is heavy or difficult to be cleaned, and the explosive impact does not cause much damage to the surface of the cleaned material, the low frequency series transducer should be selected. Commonly used industries are: magnetic industry, steam protection industry, textile industry and so on. Note that the noise of this series is large, preferably sound insulation.

 

Medium frequency (25 ~ 28KHz): If the dirt of the cleaned material is slightly heavy or the cleaning is difficult and moderate, and the explosive impact does not cause much damage to the surface of the cleaned material, the intermediate frequency series transducer should be selected. This series of industries are the most widely used, and are common in machinery processing industry, electroplating industry, catering industry and so on.

 

Medium and high frequency (33 ~ 60KHz): When the dirt of the cleaned material is light, the cleaning is easy, or the explosive shock damage to the surface of the cleaned material is required, the medium and high frequency series transducer should be selected. Commonly used industries include precision parts, glass glasses, electronic components, circuit boards, etc.

 

High Frequency (68-200KHz): The dirt is very light and easy to clean. When the explosive impact is prohibited to damage the surface of the cleaned object, the high frequency series transducer should be selected. Commonly used industries are semiconductors, special high-precision parts, etc.

 

 

Multi Frequency Ultrasonic cleaning Transducer

Type

Full length(mm)

weight(g)

FR (khz)

impedance(Ω)

CP(Pf)±10%

power(w)

ARS-38/80 KHZ P 4

61

330

38/80

<35

4800

50

ARS-40/100KHZ P 4

54

280

 41/100

<50

5200

40

ARS-50K P4

42

135

 50

<35

3200

25

ARS-28/83/130 KHZ P 4

70

480

 28/83/130

<30

5000

30

ARS-25/45/80KHZ P4

78

540

 25/45/80

<30

5000

30

ARS-33/89/135KHZ P4

60

430

33/89/135

<30

5000

40

ARS-28/41/123KHZ P4

68

630

28/41/123

<35

6800

60

ARS-40/80/120KHZ

56

260

120

<35

5400

30

ARS-28/60/70/84KHZP4(quadruple frequency)60W70K

81

465

 28/50/60/70/84

<35

5000

30

ARS--40/77/100/170KHZ P4

55

270

 40/77/100/170

<30

4000

30


04Product display

IMG_1110.jpgIMG_1168.jpgIMG_1001 .JPG

.jpg

The Process Flow_01

Why choose us and About usCertificationShiping and Packing.jpg

Shiping.jpg

Transducer packing.jpg

 

 FAQ

Send your message to us

No need register, just fill in contact info below, we will reply you within 24 hours!

Please prove you are human by selecting the "Key".