40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device

Message

$14.00

Have chosenThere are no options selected.

Start To Order

Add To Cart Successfully!

SEND INQUIRY
40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device
40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device
40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device
40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device
40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device
40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device
40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device

40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device

  • Item No.ARS-40/80/120K P4
    MOQ1 Piece
Tag  sourcing
Add Request About This Product
Max file 5MB each
If lager file please send us email

Quantity:

From $14.0012.009.00 / Piece
$14.00
You save $ -14.00
Trade Assuranceprotects your orders
On-time Dispatch Guarantee
On-time dispatch is guaranteed or you will be eligible to claim platform compensation.
Refund Policy
If the shipment is delayed or product quality differs from what are specified in the online order, you can claim for a refund.
Quick refund: If you can apply for a refund within two hours of making a payment, you will receive a refund immediately.

If you have your own design, please contact us, there will have a professional customer service to communicate with you.

Don't have your files right now?No worries, Check out our art tips for more information.

If over 500pcs, mass production will start until pre-production sample has been approved.

Est. 7 days production

40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device

02Specification

40/80/120Khz Piezo Ultrasonic Sensor 60W Ultrasonic Transducer For Industry Washer Device0W 

The transducer is an energy converter, which can converted the high frequency, high power current, output of power supply into reciprocating mechanical energy of the ultrasonic vibration, the vibration frequency output of drive power with the same frequency as the current. To further enlarge the amplitude of ultrasonic energy input to the place where we need. Ultrasonic cleaning has become more and more widely used in various industries, agriculture, household equipment, electronics, automobile, rubber, printing, aircraft, food, hospital and medical research.

 

Ultrasonic Transducer Frequency selection

The frequency of the transducer is inversely proportional to the wavelength, and the wavelength is related to the diameter of the cavity (strictly speaking, the nucleation time is longer due to the low frequency), and the diameter of the cavity is related to the explosion pressure. The higher the general frequency, the smaller the wavelength, the smaller the diameter of the cavity, the lower the explosion pressure, but the higher the density of the cavity, the better the permeability.

 

Based on the above principles:

Low frequency (17 ~ 23KHz): When the dirt of the cleaned material is heavy or difficult to be cleaned, and the explosive impact does not cause much damage to the surface of the cleaned material, the low frequency series transducer should be selected. Commonly used industries are: magnetic industry, steam protection industry, textile industry and so on. Note that the noise of this series is large, preferably sound insulation.

 

Medium frequency (25 ~ 28KHz): If the dirt of the cleaned material is slightly heavy or the cleaning is difficult and moderate, and the explosive impact does not cause much damage to the surface of the cleaned material, the intermediate frequency series transducer should be selected. This series of industries are the most widely used, and are common in machinery processing industry, electroplating industry, catering industry and so on.

 

Medium and high frequency (33 ~ 60KHz): When the dirt of the cleaned material is light, the cleaning is easy, or the explosive shock damage to the surface of the cleaned material is required, the medium and high frequency series transducer should be selected. Commonly used industries include precision parts, glass glasses, electronic components, circuit boards, etc.

  

High Frequency (68-200KHz): The dirt is very light and easy to clean. When the explosive impact is prohibited to damage the surface of the cleaned object, the high frequency series transducer should be selected. Commonly used industries are semiconductors, special high-precision parts, etc.

 

Specification List 
ModelFrequency  CapacitanceResonance
Impedance
   Size Power Insulation resistance
(KHz)(pF)(Ω) Radiation head*Height
 (mm)
(W)(2500VDC)
ARS-8QXHNQ-3828/4028/40±1.03800±10%≤30Ω65*7060w≥100MΩ
ARS-8QXHNQ-2540/13040/130±2.03100±10%≤30Ω25*5820w≥100MΩ
ARS-4QXHNQ-3840/6838/66±2.04800±10%≤20Ω50*6550w≥100MΩ
ARS-4QXHNQ-3840/80/13038/79/128±2.04200±10%≤25Ω40*5460w≥100MΩ
ARS-4QXHNQ-3840/60/8038/65/84±2.04800±10%≤25Ω40*5460w≥100MΩ
ARS-8QXHNQ-5020/40/6020/40/60±2.05200±10%≤25Ω78*94120w≥100MΩ
ARS-4QXHNQ-3840/100/16038/100/160±2.04800±10%≤25Ω40*5760w≥100MΩ
Screw hole size (diameter * pitch * depth)M10*1.0*10

 

04Product display

 

IMG_1167 .jpgIMG_1001 .JPG

 The Process Flow_01

 

Why choose us and About usCertification

 

 

 

 

 

 

 

 

 Shiping and Packing.jpg

Shiping.jpg

Transducer packing.jpg

 

FAQ

Send your message to us

No need register, just fill in contact info below, we will reply you within 24 hours!

Please prove you are human by selecting the "Cup".