40KHZ 100L Injection Moulds Dies And Tools Ultrasonic Electrolysis Mold Cleaning Machine

Electrolysis mold function, the dirt is produced by the action of electric current to produce positive and negative molecules, through the catalytic action of oxygen and hydrogen generated on the metal surface, the dirt part is quickly decomposed, peeled off and surfaced; using the cavitation effect of ultrasound , Produce countless small bubbles and collide with the object. Impact blasting the dirt on the workpiece to automatically peel off the dirt. Mold cleaning uses a special solution to quickly decompose the dirt through a sufficient chemical effect. Completely remove any dirt on the surface of the mold, even any mold with a complex shape can remove dirt, and has a good rust prevention function, which greatly reduces the product defect rate after mold cleaning.
Compared with traditional mold cleaning methods, mold cleaning machine cleaning operation time can be shortened to an astonishing degree.

Plastic mold-ultrasonic cleaning machine has been approved by Japanese, Korean, Taiwanese, and Hong Kong-owned factories, breaking the monopoly of foreign imports; mastering a series of plastic, rubber, silicone, acetate, bakelite molds The cleaning process can effectively and thoroughly remove the residual high-temperature oxides on the mold; rust spots and oil residues; the plastic mold cleaning machine ranks first in the industry.
Equipment use: Used for cleaning plastic molds, modules, modules, mold cores, inserts, inserts, high-temperature carbon deposits, sulfide, gas, degreasing, and rust removal.
Brief introduction of electric control of electrolytic ultrasonic mould cleaning machine
1. Equipment use; used for cleaning of precision optical molds, optical light guide plate molds, and cleaning of oxides, gas, high temperature residues, oil stains, and carbon deposits on optical molds.
1. Using Mitsubishi PLC and touch screen to control operation, there are four programs to control the cleaning process.
2. The cleaning time and cleaning process can be set freely on the touch screen; there are 3 automatic cleaning process procedures and multiple manual cleaning procedures.
3. There are fault displays on the control screen, such as low liquid level display, discharge display, pump overcurrent display, and working display.
4. There is a record of cleaning times and an acousto-optic alarm device.

Multi frequency cleaning machine

40KHZ 100L Injection Moulds Dies And Tools Ultrasonic Electrolysis Mold Cleaning Machine