40KHZ Injection Mold Ultrasonic Cleaning With Heater For Cleaning Auto Parts

Ultrasonic cleaning is a process in which a 40KHZ high-frequency power supply is used to convert the transducer to mechanical energy from electrical energy. In this process, the transducer transmits huge energy to the cleaning tank solution, generating positive and negative pressure zones in the liquid, forming a number Tens of thousands of cavitation bubbles are constantly forming explosions, impacting the surface of the cleaned metal object, and quickly detaching the dirt on the metal surface.
3. The circulatory system is composed of a corrosion-resistant American little giant magnetic pump and a self-circulating filter, so that the dirt that is washed off is quickly isolated by the filter cotton core, reducing liquid surface floating. At the same time, it can accelerate the electrolysis of the solution. Purify the solution and improve the utilization rate of the solution.

Equipment use: Used for decontamination of precision plastic molds, hardware, modules, molds, mold cores, inserts, inserts, and high temperature electrolysis ultrasonic (plastic mold) cleaning machine cleaning process description
The electrolytic ultrasonic system is composed of an ultrasonic generating system, an electrolytic circuit system, a circulating filter system, a control system, a special gold type cleaning fluid and a water-based rust inhibitor.
The electrolytic cleaning system emits gas to the metal surface, and uses the sauna effect to remove the dirt and impurity on the metal surface. It can also completely remove the rust spots, carbon deposits, gas, resin components, moisture, and oil on the mold. Ultrasonic vibration peels off the dirt and floats, and the metal is attached to the cathode. Even the dirt in a fairly small corner can be completely removed. 2. The metal is restored to the original copper green color, and the original beauty of the metal is restored. 3, even if it is complex The shape can also remove dirt. 4, it can completely clean and decontaminate. 5, has a good rust and rust prevention effect. 6, saves one hour than manual cleaning; 7, is more environmentally friendly and safer than using organic solvents. 8. Greatly reduce the defective rate after washing.
Process; 1 gold type washing 6-15 minutes-2 running water washing 2 minutes--3 anti-rust project 3 minutes.

40KHZ Injection Mold Ultrasonic Cleaning With Heater For Cleaning Auto Parts