4500ML/H 230W Ultrasonic Mist Maker Atomizing Transducer

Working principle of ultrasonic humidifier:
Ultrasonic series humidifier products use high-frequency electronic oscillation circuit, the ultrasonic energy generated by the transducer directly acts on the water, and the water is atomized under the action of strong ultrasonic cavitation. Atomized into fine water particles with a diameter of only 1 ~ 5μm, and blown to the humidification space through a unique air duct, the water mist particles exchange heat and moisture with the flowing air to achieve the purpose of isenthalpic humidification of the air.
The ultrasonic atomizing humidifier is designed into two ways of use. It can be hung on the external wall, and can also be replaced by rubber wheels to adapt to use under different conditions. The humidifier is designed with non-water protection and automatic water inlet when energized to automatically control the water level.

Description of system performance characteristics:
1. The diameter of the mist particles produced by the ultrasonic humidifier is only 1~5μm, which can be received by the air express. The humidification efficiency is close to 100%. The particles are small and uniform, and can be transported over long distances. The air is humidified without dripping. Use the φ110mm PVC pipe To transport water mist, a single PVC pipe can transport water mist to a distance of 40-50m. No nozzles are required, so there is no trouble of blocking the nozzles.
2. The energy consumption index per unit of humidification is low, the energy consumption is only 0.05kw/(kg.w), which is equivalent to 1/10~1/15 of other humidification methods, and the operating cost is low.
3. Adopting the world's advanced atomization technology and integrated atomization components, original design to prevent fan splashing, water leakage prevention design of the mist outlet, easy cleaning design and water shortage protection device, plus the 60,000-hour high-life roller imported from Taiwan The needle bearing fan ensures excellent humidification quality and reliable performance.
4. When the humidifier is atomized, there is no mechanical drive, no high-power motor, not pure mechanical energy to drive humidification, no compressed air, no noise interference, no pollution. The failure rate is low, it is an energy-saving and environmentally friendly humidification equipment, which is efficient, reliable and practical, and is your ideal choice.
5. The model is small in size and can be independently built into a system according to the site conditions. It is not only suitable for the installation of new plants, but also can be upgraded and upgraded on the basis of the original equipment without destroying the original equipment to meet the humidity requirements of the production process.

The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:

1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.

2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.

3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.

4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.

5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.

6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.

7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.

8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.

The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:

1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.

2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.

4500ML/H 230W Ultrasonic Mist Maker Atomizing Transducer