Industry Cleaning Vibrator Ultrasonic Transducer Pulse Wave Ultrasound Cleaner Transducer 54K 35W High Frequency Wave Output
Ultrasonic vibrator, ultrasonic vibrating head Shenzhen OURS ULTRASONIC Co., Ltd. is an ultrasonic generator, transducer, ultrasonic vibrating screen generator, ultrasonic transducer, vibrator, ultrasonic edger, ultrasonic embossing machine, ultrasonic vibration board, High-frequency generators, ultrasonic electronic components and other products specializing in the production and processing of limited liability companies, the company mainly based on ultrasonic power (generator), for the majority of ultrasonic manufacturers supporting, strong technical strength, stable machine quality, low prices quickly enter the market Become a leader in the industry.
The transducer uses different piezoelectric materials:
The black wafer is the P4 series. This type of piezoelectric material is a medium power emission type material with dual transmission and reception characteristics.
It has the mechanical quality factor of teaching low dielectric loss and teaching height, mainly used in ultrasonic cleaning, ultrasonic atomization and so on.
The yellow wafer is the P8 series. This type of piezoelectric material belongs to the high-power emission type material, and its main features are high mechanical quality factor.
Good stability, very low dielectric loss, especially suitable for making ultrasonic transducers for high power transmission. widely used in
Ultrasonic welding, phacoemulsification, ultrasonic polishing, ultrasonic cleaning, etc.
Ultrasonic Transducer classification:
A. piezoelectric chip classification: Black chip P4 series and yellow chip P8 series;
B. Frequency classification: low frequency series (17-23KHz), intermediate frequency series (25-28KHz), medium and high frequency series (33-60KHz) and high frequency series (68-200KHz);
C. Power classification: 30W series (including 35W), 50W series (including 60W), 100W series (including 80W) and other unconventional power;
D. shape classification: straight column and horn type
Ultrasonic Transducer Frequency selection:
The frequency of the transducer is inversely proportional to the wavelength, and the wavelength is related to the diameter of the cavity (strictly speaking, the nucleation time is longer due to the low frequency), and the diameter of the cavity is related to the explosion pressure. The higher the general frequency, the smaller the wavelength, the smaller the diameter of the cavity, the lower the explosion pressure, but the higher the density of the cavity, the better the permeability.
Based on the above principles:
Low frequency (17 ~ 23KHz): When the dirt of the cleaned material is heavy or difficult to be cleaned, and the explosive impact does not cause much damage to the surface of the cleaned material, the low frequency series transducer should be selected. Commonly used industries are: magnetic industry, steam protection industry, textile industry and so on. Note that the noise of this series is large, preferably sound insulation.
Medium frequency (25 ~ 28KHz): If the dirt of the cleaned material is slightly heavy or the cleaning is difficult and moderate, and the explosive impact does not cause much damage to the surface of the cleaned material, the intermediate frequency series transducer should be selected. This series of industries are the most widely used, and are common in machinery processing industry, electroplating industry, catering industry and so on.
Medium and high frequency (33 ~ 60KHz): When the dirt of the cleaned material is light, the cleaning is easy, or the explosive shock damage to the surface of the cleaned material is required, the medium and high frequency series transducer should be selected. Commonly used industries include precision parts, glass glasses, electronic components, circuit boards, etc.
High Frequency (68-200KHz): The dirt is very light and easy to clean. When the explosive impact is prohibited to damage the surface of the cleaned object, the high frequency series transducer should be selected. Commonly used industries are semiconductors, special high-precision parts, etc.
|Specification List |
| Size |
|Screw hole size (diameter * pitch * depth)M10*1.0*10|