English
German
French
Russian
Spanish
Japanese
Korean
Portuguese
Ukrainian
Arabic
Italian
Optional Welding Mode 20KHZ Ultrasonic Welding of Copper to Laminate Circuit Board
1-9 Set
$1,260.00
≥ 10 Set
$1,200.00
- Item No. 20210131b966fMOQ 1 Set
- Product size 48 x 46 x 52 cmProduct weight 22 kg
Choice
Quantity:
If you have your own design, please contact us, there will have a professional customer service to communicate with you.
Don't have your files right now?No worries, Check out our art tips for more information.
If over 500pcs, mass production will start until pre-production sample has been approved.
Est. 7 days production
Optional Welding Mode 20KHZ Ultrasonic Welding of Copper to Laminate Circuit Board
Working principle and characteristics
1. Ultrasonic metal welding machine uses the principle of ultrasonic high-frequency vibration friction to convert the energy of ultrasonic vibration into frictional energy and transfer it to the metal surface to be welded. When friction generates heat and pressure is applied to it, the metal structure molecule Fully activated to form a new type of device for fusion between molecular layers.
2. Features:
Microcomputer control, electronic tuning frequency, LCD display, continuously adjustable power, simple operation, stable and reliable work; firm welding, good consistency, weldment has the characteristics of firm welding surface, high strength, beautiful appearance, and environmental protection. Easy to operate, built-in electronic protection circuit, safe to use, used for similar welding of metals, can perform single-point or multi-point welding on non-ferrous metals; widely used in battery and hardware products industries.
Advantages of ultrasonic metal welding machine:
1. Welding without sparks, environmental protection and safety.
2. The welding material does not melt, and the metal is not fragile.
3. Low requirements on the surface of the welded metal, both oxidation and electroplating can be welded.
4. Ultrasonic welding time is short, without any flux, gas or solder.
5. After welding, the conductivity is good, and the resistivity is extremely low or nearly zero.
The 20KHZ ultrasonic metal welding machine produced by our company uses high-frequency vibration waves to be transmitted to two metal surfaces to be spot welded. Under pressure, the two metal surfaces are rubbed against each other to form a fusion between molecular layers. Its advantages are rapid, energy-saving, high fusion strength, good electrical conductivity, no sparks, and close to cold processing.
Applicable products of sonic metal welding machine:
1. The wires are fused to each other, and one and more wires are fused to each other.
2. Ni-MH battery Ni-MH battery nickel mesh and nickel sheet mutual fusion and nickel sheet mutual fusion.
3. The wires are fused with famous electronic components, contacts and connectors.
4. Lithium battery and polymer battery copper foil and nickel sheet are mutually fused, and aluminum foil and aluminum sheet are mutually fused.
5. The sealing and cutting of the ultrasonic metal tube can be water and air tight.
6. Large heat sinks, heat exchange fins, bees for famous household appliances and automotive products
Mutual melting of nest hearts.
7. Electromagnetic switch, non-fuse switch and other high current contacts, mutual fusion of dissimilar metal sheets.
Type | Power(W) | Frequency (KHz) |
ARS-JSHJ-800W35 | 800W | 35KHz |
ARS-JSHJ-800W40 | 800W | 40KHz |
ARS-JSHJ-1000W15 | 1000W | 15KHz |
ARS-SLHJ-1000W20 | 1000W | 20KHz |
ARS-SLHJ-1000W35 | 1000W | 35KHz |
ARS-SLHJ-1000W40 | 1000W | 40KHZ |
ARS-JSHJ-2000W20 | 2000W | 20KHZ |
ARS-JSHJ-2000W15 | 2000W | 15KHZ |
ARS-JSHJ-3200W15 | 3200W | 15KHZ |
ARS-JSHJ-4200W15 | 4200W | 15KHZ |
Optional Welding Mode 20KHZ Ultrasonic Welding of Copper to Laminate Circuit Board
Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!
