Factory Produced 28KHZ/35KHZ 800W high frequency ultrasonic ear loop weld generator for ultraosnic welding machine
The principle of ultrasonic plastic welding is to produce 35KHZ high frequency signal and energy exchange system by generator, and convert the signal into high frequency mechanical vibration.
The temperature of the interface is raised by the friction between the surface of the workpiece and the inner molecules.When the temperature reaches the melting point of the workpiece itself, the workpiece interface will melt quickly, and then fill the gap between the interfaces. When the vibration stops, the workpiece will be cooled and fixed at a certain pressure, and then the welding will be achieved.
1.One key start, simple operation and easy to start with for customers.
2.Imported CPU and drive unit to ensure reliable power supply.
3.Effectively balance the amplitude while frequency is locked based on the frequency and amplitude control using PID.
4.Power outburst mode, save energy comparing to the traditional ultrasonic hand-held welding machine.
5.Welding amplitude adjustable from 60% to 100% by 1% step.
6.Dual-frequency mode, one can easily switch from one frequency converter to another by software configuration, the frequency setting range is ±8K.
Ultrasonic spot welding in the plastics thermoplastics and structural foam materials
The hand-held sonotrode for ultrasonic welding (bonding) is light and handy, suitable for left- or right-handed operation. It is equipped with simple air-cooling system, which prevents the device from heating and the palm from sweating and this way facilitates the control and precise operation.
The ultrasonic hand-held sonotrode is equipped with an ultrasonic generator type. The horn and the handle are made of high—quality materials, that ensure long life and smooth operation.
Basic characteristics:
Speed of welding: approximately 5 seconds, depending on the material and the required results.
The ultrasonic technology ensures strong and high-quality welding between the assembled parts without using additional materials.
Product Specifications :
1 - hand welder can be applied to a single point welding, screw implants , riveting .
2 - Portable design , save space , easy to operate.
3 - can be used independently , but also can be used with automatic peripheral equipment .
4 - There are lessons device models , especially for rhinestones / PC drill mount in haute couture processing .
Specifications
1. ultrasonic generator + ultrasonic transducer+ horn.
ultrasonic welding machine for plastic
1.PP,ABS,AS,PS,nylon welding
2.high power and strong
3.good quality with best price
Ultrasonic welding machine for plastic remains one of the fastest techniques for welding smaller thermoplastic parts. In ultrasonic welding, one part is held stationary in a holding fixture while the other part is vibrated acoustically against it under pressure, creating frictional heat at their joining surfaces.
Applications:
Ultrasonic welding machine for plastic is widely used in auto industry, electron industry, medical treatment industry, office supply, packaging industry, and toy industry, etc. For example,
Ultrasonicspotwelding machine
Type | Power(W) | Frequency (KHz) |
ARS-DHJ-300 | 300W | 15khz |
ARS-DHJ-300 | 300W | 20khz |
ARS-DHJ-300 | 300W | 28khz |
ARS-DHJ-300 | 300W | 35KHz |
ARS-DHJ-300 | 300W | 40khz |
ARS-DHJ-500 | 500W | 15khz |
ARS-DHJ-500 | 500W | 20khz |
ARS-DHJ-500 | 500W | 28khz |
ARS-DHJ-500 | 500W | 35KHz |
ARS-DHJ-500 | 500W | 40khz |
ARS-DHJ-800 | 800W | 15khz |
ARS-DHJ-800 | 800W | 20khz |
ARS-DHJ-800 | 800W | 28khz |
ARS-DHJ-800 | 800W | 35KHz |
ARS-DHJ-800 | 800W | 40khz |
ARS-DHJ-900 | 900W | 15KHz |
ARS-DHJ-900 | 900W | 20khz |
ARS-DHJ-1000 | 1000W | 15KHz |
ARS-DHJ-1000 | 1000W | 20khz |
Factory Produced 28KHZ/35KHZ 800W high frequency ultrasonic ear loop weld generator for ultraosnic welding machine