Ultrasonic Nebulizer 10 Headed Industrial Ultrasonic Atomizer Circuit Industrial Driver
  • Item No.20210112d88fa
    MOQ1 Piece / Pieces
  • Size 42.00 x 40.00 x 25.00 cm
    Weight12.00 kg
    Model Number
    ARS-WHHNQ-230W
    description

    Ultrasonic Nebulizer 10 Headed Industrial Ultrasonic Atomizer Circuit Industrial Driver

    ----_02.jpg

    Ultrasonic atomizer adopts high-efficiency integrated circuit, ultra-small and integrated unique structure design, and important parts adopt high-quality atomizer. Humidifier, incense burner, beauty machine, disinfection machine, bathtub fog machine, bonsai, handicrafts are widely used.
    Ultrasonic atomizer series products, from single nozzle to multiple nozzles, from unstable flange mounting structure to high-performance input type, from water atomizer to atomizer resistant to strong oxidants such as chlorine dioxide, from zinc From alloy shell to brass and stainless steel shell, choose atomizer product model, and adjust the parameters and process of atomizer reasonably


    Small industrial humidifiers are widely used in the textile industry, paper industry, computer room, electronics industry, mobile phone battery industry, spray industry, plastic industry, gunpowder industry, printing industry, laboratory, tobacco industry, HVAC industry, fresh-keeping storage, food industry , Planting, breeding, artificial landscape, artificial fog, etc.
    A humidifier is a household appliance that increases the humidity in a room. The humidifier can humidify the designated room, or it can be connected to the boiler or central air conditioning system to humidify the entire building.

     

    The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:

    1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.

    2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.

    3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.

    4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.

    5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.

    6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.

    7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.

    8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.

    The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:

    1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.

    2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.

     

    [Notice of use]
    1.When the atomizer is working properly, please do not put your hand above the atomizer spray chamber so as to prevent ultrasonic injury.
    2.Atomizer must be in water to work properly, before use, please put it into the water, then put on the power supply, and to ensure that the surface of the atomizing piece is in water condition, so as not to damage the atomizer.
    3.Switch off the power before you use the nebulizer, then remove the nebulizer from the water.
    4.When using this atomizer, please choose the output power greater than 300W, the output voltage is DCV45 + 5 power supply.
    5.When more than one provided using the same container, the need to pay attention to the atomizer shell are communicated each other, which do not use water line design solution and the wafer produce potential difference (electrolytic atomizer casing itself has charged) to prevent the generation of electric corrosion work (electric spark corrosion).
    6.The fog produced by the atomizer must be forced out by the fan, and each group of nebulizer keeps the plane space of the 350CM2, so as to avoid the water temperature being too high and shorten the service life of the atomizer.
    7.Atomizer is not suitable for atomizing corrosive liquid, so as not to damage the atomizer, metal shell and atomizing piece.
    8.Please do not damage the water level induction switch during the installation so as to avoid the malfunction of the water level switch and cause the atomizer to be out of control. After the water level switch is damaged, it should be stopped. Otherwise, the atomizing disc will be dry burned, thus further damaging the atomizer. At this point should be repaired by professional maintenance personnel can use the rear.

    Type

    Voltage

    Size

    Power

    Water Rate

    ARS-WHHNQ-230W

    48V

    253*91*70MM

    230

    4.5KG/H

     

    ----_04.jpg

     

     WH15.jpg2.jpgAtomizing transducer6.jpg

     

     

     dfev.JPG

     

    Why choose us and About us

     

    Certification

     

    ----_17.jpg

    Shipping.JPG

     

     IMG20180620181644.jpg

     

    FAQ

     

     

    Ultrasonic Nebulizer 10 Headed Industrial Ultrasonic Atomizer Circuit Industrial Driver

     

     

     

     

     

     

    Have more questions about this product?

    Scan the QR code with your phone, or visit the URL

    https://www.digitalultrasoniccleaner.com/

    Have more questions about this product?
    • 506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen China
    • 86-13662219669
    • [email protected]