10000W 28KHZ 380V Ultrasonic Bath Air Filter Air-Condition Aluminum Tube Component Industrial Cleaning

Ultrasound is a mechanical wave with a higher vibration frequency than sound waves. It is generated by the vibration of the transducer wafer under the excitation of voltage. It has high frequency, short wavelength, small diffraction phenomenon, especially good directivity, which can be directed into rays. Dissemination and other characteristics. Ultrasound has a great ability to penetrate liquids and solids, especially in solids that are opaque to sunlight, where it can penetrate to a depth of tens of meters. When the ultrasonic wave hits the impurity or the interface, it will produce a significant reflection to form an echo, and it can produce a Doppler effect when it hits a moving object. Therefore, ultrasonic testing is widely used in industry, national defense, biomedicine, etc.

What is the working principle of the multi-slot ultrasonic cleaning machine? The following is an introduction to the main links and steps of its work, the principle and knowledge of how the multi-tank ultrasonic cleaning machine works. The principle of the ultrasonic cleaning machine is mainly to convert the sound energy of the power ultrasonic frequency source into mechanical vibration through the transducer, and radiate the cleaning liquid in the tank to ultrasonic waves through the cleaning tank wall. Due to the radiated ultrasonic waves, the microbubbles in the liquid in the tank can maintain vibration under the action of sound waves.
When the sound pressure or sound intensity reaches a certain level, the bubble will expand rapidly and then suddenly close. During this process, the shock wave is generated at the moment when the bubble is closed, causing a pressure of 1012-1013pa and local temperature adjustment around the bubble. The huge pressure generated by this ultrasonic cavitation can destroy insoluble dirt and make them differentiate in the solution. The direct and repeated impact of steam-type cavitation on dirt.
On the one hand, it destroys the adsorption of the dirt and the surface of the cleaning part, and on the other hand, it can cause the fatigue damage of the dirt layer and be dismissed. The vibration of the gas bubble scrubs the solid surface. Once the dirt layer is cracked, the bubbles are immediately " The “drilling” vibration causes the dirt layer to fall off. Due to cavitation, the two liquids are rapidly dispersed and emulsified at the interface. When the solid particles are wrapped in oil and adhere to the surface of the cleaning part, the oil is emulsified and the solid particles fall off by themselves. When it propagates in the cleaning liquid, it will produce positive and negative alternating sound pressure, forming a jet, which impacts the cleaning part. At the same time, due to the nonlinear effect, it will produce acoustic and micro-acoustic flow. Ultrasonic cavitation will produce high-speed at the solid-liquid interface. Microjets, all of these effects, can destroy dirt, remove or weaken the boundary dirt layer, increase stirring and diffusion, accelerate the dissolution of soluble dirt, and strengthen the cleaning effect of chemical cleaning agents. It can be seen that any place where the liquid can be immersed and the sound field has a cleaning effect, and its characteristics are suitable for cleaning parts with very complicated surface shapes. Especially after adopting this technology, the amount of chemical solvents can be reduced, thereby greatly reducing environmental pollution.

Product features:
The single slot ultrasonic cleaning machine is composed of two parts of ultrasonic generator and cleaning tank. The generator adopts imported high-power power supply module, which has stable performance. It can change the size of the cleaning tank and add heating function according to the requirements of the customer.
Scope of application:
This machine is suitable for cleaning certain batches of workpieces. It is suitable for cleaning, machinery, medical equipment, pharmaceutical, electronic, chemical, aerospace, textile and chemical fiber, automobile, optics, glasses, hardware and other industries.

Multi frequency cleaning machine

 10000W 28KHZ 380V Ultrasonic Bath Air Filter Air-Condition Aluminum Tube Component Industrial Cleaning