10 Head Ultrasonic Atomizer Circuit Driver For Fresh Vegetables

Working principle of ultrasonic humidifier:
The principle of ultrasonic atomization is to use electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the range of human hearing, and will not harm humans and animals). Through the high-frequency resonance of the atomizer, the water is thrown away from the water surface to produce a natural and elegant Water mist does not require heating or chemicals. In the process of atomization, a large number of negative ions will be released, combined with the floating smoke and dust in the air, electrostatic treatment will precipitate and filter them, which can effectively remove harmful substances and odors such as formaldehyde, carbon monoxide, bacteria, and prevent and treat decoration pollution. High concentration of negative ions can effectively kill harmful bacteria and viruses suspended in the air, purify the air and reduce the occurrence of diseases. During the atomization process, the negative ion particles can compensate the air humidity and improve the dry home environment or industrial environment.
Applicable to the following industries:
Textile industry: humidity control in textile mills, eliminate static electricity and reduce dust.
Paper industry: Paper humidity control, eliminate static electricity and reduce dust.
Computer room: humidity control and static elimination of various computer rooms.
Electronics industry: semiconductor component factories, LCD factories, PCB factories, IC testing factories, etc., used for humidity control and static elimination.
Spraying industry: Humidity control in automobile coating and various spraying plants, eliminating static electricity and reducing dust.
Plastic industry: Humidity control and static elimination in plastic molding plants and plastic product manufacturers.
Gunpowder industry: gunpowder production, filling, making, and storage are used to eliminate static electricity.
Printing industry: humidity control and static elimination of plastic printing, fine printing, special printing.
Laboratory: Various types of quality inspection, testing, analysis, and environmental constant humidity in the laboratory.
Tobacco industry: tobacco processing, production humidity control and dust reduction.
HVAC industry: The central air-conditioning system increases humidity and eliminates static electricity.
Fresh-keeping storage: constant humidity fresh-keeping and constant humidity storage of fruit thinning products.
Food industry: moisture and freshness of dried, dehydrated, and refrigerated food.
Planting industry: large-scale planting of edible fungi, flowers, tropical plants and soilless cultivation and other humidity control.
Breeding industry: large-scale breeding, breeding, and incubation of livestock, poultry, and insects are used for moisturizing and disinfecting.
Artificial landscape: tropical artificial rainforest, film and television, exhibitions, etc. imitate the natural environment landscape.  

The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:

1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.

2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.

3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.

4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.

5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.

6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.

7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.

8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.

The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:

1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.

2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.

[Product maintenance and maintenance]
After the atomizer is worked for a long time, the surface of the shell and the atomizing sheet can be deposited with scale, and the service life and the atomizing quantity are seriously affected, so it is recommended that the atomizer be cleaned at least once every half a month. When cleaning, can be dipped in alcohol soft cloth gently scrub atomizer shell and atomizing surface, do not use hard objects to clean atomized tablets, so as not to scratch the fog.
Quality will affect the service life of atomizer, it is recommended to use clean water.
After the atomizer after working for a long time (about 5000 hours), atomization life attenuation, atomization quantity will decrease, then you can replace the atomizing piece new, atomizing sheet and supporting tool key please contact your local dealer or the company to buy. The method of replacement can be referred to (Figure 1), and the procedures of replacement are as follows:
 Cut off the power supply, remove the atomizer from the water, upside down and stay for a while, the atomizer of water flow out after all, and then dry cloth to wipe the spray cavity and the inner surface of the water atomizer.
 Unscrew the press ring with the tool key, remove the old energy change plate, and keep the atomizing energy exchange. The cavity is clean and dry.
 The new energy transfer plate faces up, and the reverse side is fitted and tightened.

10 Head Ultrasonic Atomizer Circuit Driver For Fresh Vegetables