20khz High Power Digital Ultrasonic Knife For Cutting Plastic
1-49 Sets
$1,750.00
≥50 Sets
$1,650.00
Model Number
ARS-SLHJ120020
description
20khz High Power Digital Ultrasonic Knife For Cutting Plastic
The principle of the ultrasonic rubber cutter is to convert 50/60Hz current into 20, 30 or 40kHz electric energy through an ultrasonic generator. The converted high-frequency electric energy is again converted into mechanical vibration of the same frequency through the transducer, and then the mechanical vibration is transmitted to the cutting knife through a set of amplitude modulator device that can change the amplitude. The ultrasonic rubber cutter vibrates along its length with an amplitude of 10-70μm and repeats 40,000 times (40 kHz) per second (the vibration of the blade is microscopic, which is generally difficult to see with the naked eye). The cutting knife then transfers the received vibration energy to the cutting surface of the workpiece to be cut. In this area, the vibration energy is used to cut the rubber by activating the molecular energy of the rubber and opening the molecular chain.
High stability: When the ultrasonic generator is working, it generates 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the cutting knife and the cutting material. The cutting is performed mechanically, so there is no need for sharp cutting edges, and the blade wear is small. The cutter head can be replaced by yourself.
No pollution: When the ultrasonic knife is cutting, the temperature of the knife head is lower than 50 ℃, so smoke and odor will not be generated, which eliminates the danger of injury and fire during cutting.
Neat cutting: Since the ultrasonic is cut by high-frequency vibration, the material will not adhere to the surface of the blade, and only a small amount of pressure is required when cutting. It will not deform and wear for fragile and soft materials. The fabric will be automatically sealed at the same time. Will cause edge collapse.
The operation is simple: the cutting knife is connected to the ultrasonic generator, the generator is connected to the 220V mains, and the switch is turned on to start cutting. It supports hand-held cutting and is equipped with an air-cooled interface.
Wide range of applications: all kinds of textile materials and plastic sheets can be ultrasonically cut, such as natural fibers, synthetic fibers, non-woven fabrics and knitted fabrics can be ultrasonically cut.
Features:
-New self-developed high-efficiency ultrasonic generator drive technology, stable and reliable work.
-It can effectively improve the work efficiency of operators and reduce work intensity.
-The cut food has a neat surface, no debris, and beautiful appearance. .
-Titanium alloy cutting knife, food grade material, users can use it safely
- Small footprint
-Equipped with EDG generation system, stable power output
High stability: When the ultrasonic generator is working, it generates 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the cutting knife and the cutting material. The cutting is performed mechanically, so there is no need for sharp cutting edges, and the blade wear is small. The cutter head can be replaced by yourself.
No pollution: When the ultrasonic knife is cutting, the temperature of the knife head is lower than 50 ℃, so smoke and odor will not be generated, which eliminates the danger of injury and fire during cutting.
Neat cutting: Since the ultrasonic is cut by high-frequency vibration, the material will not adhere to the surface of the blade, and only a small amount of pressure is required when cutting. It will not deform and wear for fragile and soft materials. The fabric will be automatically sealed at the same time. Will cause edge collapse.
The operation is simple: the cutting knife is connected to the ultrasonic generator, the generator is connected to the 220V mains, and the switch is turned on to start cutting. It supports hand-held cutting and is equipped with an air-cooled interface.
Wide range of applications: all kinds of textile materials and plastic sheets can be ultrasonically cut, such as natural fibers, synthetic fibers, non-woven fabrics and knitted fabrics can be ultrasonically cut.
Features:
-New self-developed high-efficiency ultrasonic generator drive technology, stable and reliable work.
-It can effectively improve the work efficiency of operators and reduce work intensity.
-The cut food has a neat surface, no debris, and beautiful appearance. .
-Titanium alloy cutting knife, food grade material, users can use it safely
- Small footprint
-Equipped with EDG generation system, stable power output
Type | Power(W) | Frequency (KHz) |
ARS-DHJ-300 | 300W | 15khz |
ARS-DHJ-300 | 300W | 20khz |
ARS-DHJ-300 | 300W | 28khz |
ARS-DHJ-300 | 300W | 35KHz |
ARS-DHJ-300 | 300W | 40khz |
ARS-DHJ-500 | 500W | 15khz |
ARS-DHJ-500 | 500W | 20khz |
ARS-DHJ-500 | 500W | 28khz |
ARS-DHJ-500 | 500W | 35KHz |
ARS-DHJ-500 | 500W | 40khz |
ARS-DHJ-800 | 800W | 15khz |
ARS-DHJ-800 | 800W | 20khz |
ARS-DHJ-800 | 800W | 28khz |
ARS-DHJ-800 | 800W | 35KHz |
ARS-DHJ-800 | 800W | 40khz |
ARS-DHJ-900 | 900W | 15KHz |
ARS-DHJ-900 | 900W | 20khz |
ARS-DHJ-1000 | 1000W | 15KHz |
ARS-SLHJ2600 | 2600W | 20khz |
20khz High Power Digital Ultrasonic Knife For Cutting Plastic
Have more questions about this product?
Scan the QR code with your phone, or visit the URL
Have more questions about this product?
- 506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen China
- 86-13662219669
- [email protected]