20khz 1200W 110V or 220V Hand Held Ultrasonic Cutting Knife For Cutting Nylon
1-499 Sets
$1,750.00
≥500 Sets
$1,650.00
Model Number
ARS-SLHJ120020
description
20khz 1200W 110V or 220V Hand Held Ultrasonic Cutting Knife For Cutting Nylon
Ultrasound can be used to cut thermoplastic multilayer textiles, non-woven materials or films into arbitrary shapes, and simultaneously weld them along the cutting contour. The thermoplastic fiber content should be at least 20%. The anvil with the corresponding cutting profile is cut by the vibration generated by the ultrasonic system. At the same time, the vibration attenuation causes heat to be generated in the cutting area, thereby welding along the cutting edge.
Cut
The blade vibrated by ultrasonic waves quickly and accurately separates the items to be cut with little resistance, and does not produce residue. Ultrasonic has been used for cutting finished products for many years. When cutting baked goods, energy bars, cheese, pizza and other materials, the vibrating (cold) cutting horn reduces the resistance during the cutting process and removes adhered product residues. The result: a flat surface that can be cut again is formed without deformation or thermal damage to the product.
High stability: When the ultrasonic generator is working, it generates 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the cutting knife and the cutting material. The cutting is performed mechanically, so there is no need for sharp cutting edges, and the blade wear is small. The cutter head can be replaced by yourself.
No pollution: When the ultrasonic knife is cutting, the temperature of the knife head is lower than 50 ℃, so smoke and odor will not be produced, which eliminates the danger of injury and fire during cutting.
Neat cutting: Since the ultrasonic is cut by high-frequency vibration, the material will not adhere to the surface of the blade, and only a small amount of pressure is required when cutting. It will not deform and wear for fragile and soft materials. The fabric will be automatically sealed at the same time. Will cause edge collapse.
The operation is simple: the cutting knife is connected to the ultrasonic generator, the generator is connected to the 220V mains, and the switch is turned on to start cutting. It supports hand-held cutting and is equipped with an air-cooled interface.
Wide range of applications: all kinds of textile materials and plastic sheets can be ultrasonically cut, such as natural fibers, synthetic fibers, non-woven fabrics and knitted fabrics can be ultrasonically cut.
Cut
The blade vibrated by ultrasonic waves quickly and accurately separates the items to be cut with little resistance, and does not produce residue. Ultrasonic has been used for cutting finished products for many years. When cutting baked goods, energy bars, cheese, pizza and other materials, the vibrating (cold) cutting horn reduces the resistance during the cutting process and removes adhered product residues. The result: a flat surface that can be cut again is formed without deformation or thermal damage to the product.
High stability: When the ultrasonic generator is working, it generates 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the cutting knife and the cutting material. The cutting is performed mechanically, so there is no need for sharp cutting edges, and the blade wear is small. The cutter head can be replaced by yourself.
No pollution: When the ultrasonic knife is cutting, the temperature of the knife head is lower than 50 ℃, so smoke and odor will not be produced, which eliminates the danger of injury and fire during cutting.
Neat cutting: Since the ultrasonic is cut by high-frequency vibration, the material will not adhere to the surface of the blade, and only a small amount of pressure is required when cutting. It will not deform and wear for fragile and soft materials. The fabric will be automatically sealed at the same time. Will cause edge collapse.
The operation is simple: the cutting knife is connected to the ultrasonic generator, the generator is connected to the 220V mains, and the switch is turned on to start cutting. It supports hand-held cutting and is equipped with an air-cooled interface.
Wide range of applications: all kinds of textile materials and plastic sheets can be ultrasonically cut, such as natural fibers, synthetic fibers, non-woven fabrics and knitted fabrics can be ultrasonically cut.
Type | Power(W) | Frequency (KHz) |
ARS-DHJ-300 | 300W | 15khz |
ARS-DHJ-300 | 300W | 20khz |
ARS-DHJ-300 | 300W | 28khz |
ARS-DHJ-300 | 300W | 35KHz |
ARS-DHJ-300 | 300W | 40khz |
ARS-DHJ-500 | 500W | 15khz |
ARS-DHJ-500 | 500W | 20khz |
ARS-DHJ-500 | 500W | 28khz |
ARS-DHJ-500 | 500W | 35KHz |
ARS-DHJ-500 | 500W | 40khz |
ARS-DHJ-800 | 800W | 15khz |
ARS-DHJ-800 | 800W | 20khz |
ARS-DHJ-800 | 800W | 28khz |
ARS-DHJ-800 | 800W | 35KHz |
ARS-DHJ-800 | 800W | 40khz |
ARS-DHJ-900 | 900W | 15KHz |
ARS-DHJ-900 | 900W | 20khz |
ARS-DHJ-1000 | 1000W | 15KHz |
ARS-SLHJ-1200 | 1200W | 20khz |
20khz 1200W 110V or 220V Hand Held Ultrasonic Cutting Knife For Cutting Nylon
Have more questions about this product?
Scan the QR code with your phone, or visit the URL
Have more questions about this product?
- 506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen China
- 86-13662219669
- [email protected]