1800W 28KHZ/40KHZ Automobile Spare Parts Multi Tank Ultrasonic Cleaner For Cleaning Industrial parts

The electrolytic cleaning system emits gas to the metal surface, and uses the sauna effect to remove the dirt and impurity on the metal surface. It can also completely remove the rust spots, carbon deposits, gas, resin components, moisture, and oil on the mold. Ultrasonic vibration peels off the dirt and floats, and the metal is attached to the cathode. Even the dirt in a fairly small corner can be completely removed. 2. The metal is restored to the original copper-green color and the original beauty of the metal is restored. 3, even if it is complex The shape can also remove dirt. 4, it can completely clean and decontaminate. 5, has a good rust and rust prevention effect. 6, saves one hour than manual cleaning; 7, is more environmentally friendly and safer than using organic solvents. 8. Greatly reduce the defective rate after washing.
Process; 1 gold type washing 6-15 minutes -2 running water washing 2 minutes-3 anti-rust project 3 minutes.

Principle of electrolytic mold cleaning machine: electrolysis is the process of chemical decomposition of substances under the action of electric current. During the electrolysis process, the dirt on the metal surface begins to fall off, and the peeling is accelerated under the impact of ultrasonic waves. The metal surface is stained with animal and vegetable oils, minerals Oil, paraffin, carbon deposit, oxide layer. Use electrolysis to remove these dirt. When the current passes through the mold electrolytic cleaning agent containing a special formula, oxygen is generated near the positive electrode of the electrolytic cell, and hydrogen is generated near the negative electrode. Put the metal parts to be cleaned into the positive electrode of the electrolytic cell, and there will be small particles on the metal surface during the electrolysis process. The hydrogen gas is produced, and these small bubbles promote the peeling of the dirt from the metal surface. Ultrasonic cleaning is a process in which a 40KHZ high-frequency power supply is used to convert the transducer from electrical energy to mechanical energy. During this process, the transducer transfers huge energy to the cleaning tank solution. , Generate positive and negative pressure zones in the liquid, forming tens of thousands of cavitation bubbles, which continuously form explosions, impact the surface of the cleaned metal object, and quickly remove the dirt on the metal surface. To achieve the cleaning of the mold and restore the mold True color
1: Description of cleaning process of electrolytic ultrasonic (plastic mold) cleaning machine
The electrolytic ultrasonic system is composed of an ultrasonic generating system, an electrolytic circuit system, a circulating filter system, a control system, a special gold type cleaning fluid and a water-based rust inhibitor.
2: Equipment use: used for cleaning precision plastic molds, hardware, modules, modules, mold cores, inserts, inserts, removing high-temperature carbon deposits, sulfides, gas, degreasing, and rust removal.
Equipment usage: used for decontamination of precision plastic molds, hardware, modules, molds, mold cores, inserts, inserts, and high temperature electrolytic ultrasonic (plastic mold) cleaning machine cleaning process description
The electrolytic ultrasonic system is composed of an ultrasonic generating system, an electrolytic circuit system, a circulating filter system, a control system, a special gold type cleaning fluid and a water-based rust inhibitor.

1800W 28KHZ/40KHZ Automobile Spare Parts Mold Electrolysis Ultrasonic Cleaning Machine