50*20*6MM PZT8 Ultrasonic Piezoelectric Ceramic Ring Welding Transducers

The principle of the piezoelectric ceramic transducer is that when pressure or tension is applied to the ceramic chip, charges of opposite polarity will be generated at the two ends of the ceramic chip and a current is generated through the circuit. This effect is called the piezoelectric effect. Therefore, in the design of ultrasonic transducers, various factors should be considered, such as acoustic impedance, frequency response, impedance matching, acoustic structure, vibration mode and conversion materials, and how to design and coordinate these factors to achieve electro-acoustic conversion. best value. As a kind of energy transmission network, piezoelectric ceramic transducer has the problem of energy conversion efficiency.
The conversion efficiency is related to the selection of the transducer material, the form of vibration, the structure of the mechanical vibration system (including the support mechanism) and the operating frequency. Therefore, the problem of the ultrasonic transmitter is solved. There are two materials for piezoelectric ceramic transducers: magnetostrictive metal and piezoelectric ceramics. Piezoelectric ceramic transducer is an electronic ceramic material with piezoelectric characteristics. The main difference from a typical piezoelectric quartz crystal that does not contain ferroelectric components is that the main components of the crystal phase are all ferroelectric crystal grains. Ceramics are polycrystalline aggregates with randomly oriented grains, so the spontaneous polarization vector of each ferroelectric grain is also disoriented.
If a transducer made of this piezoelectric ceramic is put into water, then under the action of sound waves, charges will be induced at both ends of the transducer, which is a sound wave receiver. In addition, the piezoelectric effect is reversible. If an alternating electric field is applied to a piezoelectric ceramic sheet, the ceramic sheet will become thinner and thicker from time to time, and it will vibrate and emit sound waves. In order to make the ceramic exhibit macroscopic piezoelectric properties, the piezoelectric ceramic must be polarized in a strong DC electric field after firing, and the end face is subjected to multiple electrodes, so that the polarization vector of the original disordered orientation is preferentially oriented in the direction of the electric field. , The piezoelectric ceramic after polarization treatment will maintain a certain macroscopic residual polarization strength, so that the ceramic has a certain pressure.

Piezoelectric ceramic,Piezoelectric ceramic for transducer,Piezoelectric ceramic for cleaner,piezo ceramic,Tube Piezoelectric ceramic,Disc piezoelectric ceramic, Rectangle Piezoceramic, Cube Piezo ceramic, hemisphere piezo ceramic,Halfsphere Piezo ceramic, Semisphere piezo ceramic,Ball Piezo ceramic,Piezo ceramic for tooth cleaning,piezo ceramic for boat,piezo ceramic for medical,piezo ceramic for follow meter  

PiezoelectricCeramics (PZT) materials are categorized as functional ceramics. In sensors they make it possible toconvert forces, pressures and accelerations into electrical signals, and in sonic and ultrasonic transducers and actuators they convert electric voltages into vibrations or deformations.PiezoelectricCeramics materials are classified according to their chemical composition on the one hand, and by the specific application conditions on the other.

Application
1. ultrasonic cleaning trasnducer
2. ultrasonic welding tansducer
3. ultrasonic beauty transducer
4. ultrasonic underwater transducer
5. ultrasonic immersible transucer
6. ultrasonic screening transducer
7. ultrasonic cutting transducer
8. ultrasonic atomization transducer
9. ultrasonic emulsifier

 50*20*6MM PZT8 Ultrasonic Piezoelectric Ceramic Ring Welding Transducers