10Heads 4500ML/H Ultrasonic Mist Maker Fogger Atomizing Transducer For Electronics Industry

Working principle of ultrasonic humidifier:
The principle of ultrasonic atomization is to use electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the range of human hearing, and will not harm humans and animals). Through the high-frequency resonance of the atomizer, the water is thrown away from the water surface to produce a natural and elegant Water mist does not require heating or chemicals. In the process of atomization, a large number of negative ions will be released, combined with the floating smoke and dust in the air, electrostatic treatment will precipitate and filter them, which can effectively remove harmful substances and odors such as formaldehyde, carbon monoxide, bacteria, and prevent and treat decoration pollution. High concentration of negative ions can effectively kill harmful bacteria and viruses suspended in the air, purify the air and reduce the occurrence of diseases. During the atomization process, the negative ion particles can compensate the air humidity and improve the dry home environment or industrial environment.

The ultrasonic atomizer uses electronic high-frequency oscillation (the oscillation frequency is 1.7MHz or 2.4MHz, which exceeds the range of human hearing, and the electronic oscillation is not harmful to humans and animals), and through the high-frequency resonance of the ceramic atomizer, the liquid water molecules The structure breaks up to produce a natural and elegant water mist, without heating or adding any chemical reagents. Compared with the heating atomization method, energy saving is 90%. In addition, a large number of negative ions will be released during the atomization process, which will react electrostatically with smoke and dust floating in the air to precipitate them. At the same time, it can effectively remove formaldehyde, carbon monoxide, bacteria and other harmful substances, so that the air can be purified. Reduce the occurrence of diseases.
Under the correct usage conditions, the service life of the atomizing sheet is about 3000 hours, and it is extremely easy to replace. The service life is also related to the quality of the water. If scale deposits on the atomization sheet, please clean it with a soft cloth. According to different water quality and purpose of use, different atomization films can be used. For example, stainless steel-clad atomization films are used in areas with hard water quality, and glass-glazed atomization films are selected for use in acid-resistant environments.

Application industries: textile industry, electronics industry, printing industry, spraying industry, tobacco industry, edible fungus, computer room, supermarket preservation, laboratory, automobile industry, food industry, planting industry, breeding industry, artificial landscape, health care, air conditioning Industry, plastic industry, etc. It is generally used for the following equipment:
Humidifier for textile mills: high-pressure micro-mist humidification, cooling and dust removal system
Humidifiers for electronics factories: wet film humidifiers, dry steam humidifiers, special humidifiers for central air conditioning, electrode humidifiers, electric humidifiers
Humidifiers for printing plants: industrial ultrasonic humidifiers, high-pressure micro-mist humidifiers, economical wet film humidifiers
Humidifier for spraying industry: industrial ultrasonic humidifier
Humidifiers for the tobacco industry: industrial ultrasonic humidifiers, high-pressure micro-mist humidification and dust removal systems, industrial ultrasonic humidifiers, dry steam humidifiers
Special humidifier for cold storage air conditioning storage: industrial ultrasonic humidifier, high-pressure micro-mist humidification system
Humidifiers for computer rooms: industrial ultrasonic humidifiers, economical wet film humidifiers, electrode humidifiers, electric humidifiers
Special humidifier for supermarket fresh-keeping: industrial ultrasonic humidifier
Special humidifier for laboratory: industrial ultrasonic humidifier, electrode humidifier, electric humidifier

[Notice of use]
1.When the atomizer is working properly, please do not put your hand above the atomizer spray chamber so as to prevent ultrasonic injury.
2.Atomizer must be in water to work properly, before use, please put it into the water, then put on the power supply, and to ensure that the surface of the atomizing piece is in water condition, so as not to damage the atomizer.
3.Switch off the power before you use the nebulizer, then remove the nebulizer from the water.
4.When using this atomizer, please choose the output power greater than 300W, the output voltage is DCV45 + 5 power supply.
5.When more than one provided using the same container, the need to pay attention to the atomizer shell are communicated each other, which do not use water line design solution and the wafer produce potential difference (electrolytic atomizer casing itself has charged) to prevent the generation of electric corrosion work (electric spark corrosion).
6.The fog produced by the atomizer must be forced out by the fan, and each group of nebulizer keeps the plane space of the 350CM2, so as to avoid the water temperature being too high and shorten the service life of the atomizer.
7.Atomizer is not suitable for atomizing corrosive liquid, so as not to damage the atomizer, metal shell and atomizing piece.
8.Please do not damage the water level induction switch during the installation so as to avoid the malfunction of the water level switch and cause the atomizer to be out of control. After the water level switch is damaged, it should be stopped. Otherwise, the atomizing disc will be dry burned, thus further damaging the atomizer. At this point should be repaired by professional maintenance personnel can use the rear.

Remarks:
1. The amount of atomization is related to power supply voltage, power supply current, working water temperature, water quality, water level and air flow conditions. The above fog size is based on the test data obtained under the standard test environment of our factory.
2. Water level refers to the vertical distance from the shell surface to the water surface.
3. The working current of the atomizer will increase slightly with the increase of working voltage, and decrease slightly with the increase of temperature.
4. The water quality will affect the recognition ability of the water shortage protection switch. It is recommended to use clean tap water.
5. Generally, the conductivity of clean tap water is 120-250 US/CM, and the conductivity of pure water is 5-15 US/CM. The specific conductivity is determined by the local water quality.

The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:

1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.

2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.

3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.

4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.

5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.

6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.

7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.

8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.

The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:

1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.

2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.

Remarks:
1.The atomizing capacity is related to the power supply voltage, power supply current, water temperature, water quality, water level and air flow. The fog size is based on test data obtained from our standard test environment.
2.Water level is the vertical distance from the surface of the shell to the surface of the water.
3.The atomizer with working voltage working current will be increased slightly, slightly with increasing temperature.
4.Water quality will affect the identification of water shortage protective switches, and recommend the use of clean tap water.
5.Generally, the conductivity of clean tap water is 120-250 US/CM, the conductivity of pure water is 5-15US/CM, and the specific conductivity is determined by the local water quality.
6.Pay attention to the water quality can not be corrosive, easy to rot the shell; water can not contain alkaline, oily substances, will reduce the amount of fog products.
7.The product cannot be connected to the ground when it is installed (because the product shell itself has positive electricity)

10Heads 4500ML/H Ultrasonic Mist Maker Fogger Atomizing Transducer For Electronics Industry