40KHZ 800W Ultrasonic Filter Cleaner For Industry Electronic Components

Ultrasonic cleaning is a process in which a 40KHZ high-frequency power supply is used to convert the transducer to mechanical energy from electrical energy. In this process, the transducer transmits huge energy to the cleaning tank solution, generating positive and negative pressure zones in the liquid, forming a number Tens of thousands of cavitation bubbles are constantly forming explosions, impacting the surface of the cleaned metal object, and quickly detaching the dirt on the metal surface.
3. The circulatory system is composed of a corrosion-resistant American little giant magnetic pump and a self-circulating filter, so that the dirt that is washed off is quickly isolated by the filter cotton core, reducing liquid surface floating. At the same time, it can accelerate the electrolysis of the solution. Purify the solution and improve the utilization rate of the solution.

Equipment use: Used for decontamination of precision plastic molds, hardware, modules, molds, mold cores, inserts, inserts, and high temperature electrolysis ultrasonic (plastic mold) cleaning machine cleaning process description
The electrolytic ultrasonic system is composed of an ultrasonic generating system, an electrolytic circuit system, a circulating filter system, a control system, a special gold type cleaning fluid and a water-based rust inhibitor.
The electrolytic cleaning system emits gas to the metal surface, and uses the sauna effect to remove the dirt and impurity on the metal surface. It can also completely remove the rust spots, carbon deposits, gas, resin components, moisture, and oil on the mold. Ultrasonic vibration peels off the dirt and floats, and the metal is attached to the cathode. Even the dirt in a fairly small corner can be completely removed. 2. The metal is restored to the original copper green color, and the original beauty of the metal is restored. 3, even if it is complex The shape can also remove dirt. 4, it can completely clean and decontaminate. 5, has a good rust and rust prevention effect. 6, saves one hour than manual cleaning; 7, is more environmentally friendly and safer than using organic solvents. 8. Greatly reduce the defective rate after washing.
Process; 1 gold type washing 6-15 minutes-2 running water washing 2 minutes--3 anti-rust project 3 minutes.

Ultrasonic is a kind of mechanical wave with higher vibration frequency than sound wave. It is generated by the vibration of the transducer chip under the excitation of voltage. It has high frequency, short wavelength, small diffraction phenomenon, especially good directivity, which can be directed into rays. Dissemination and other characteristics. Ultrasonic waves have a great ability to penetrate liquids and solids, especially in solids that are opaque to sunlight. It can penetrate to a depth of tens of meters. When the ultrasonic wave hits the impurity or the interface, it will produce a significant reflection to form an echo, and it can produce a Doppler effect when it hits a moving object. Therefore, ultrasonic testing is widely used in industry, national defense, biomedicine, etc.

Principle of Ultrasonic Cleaning
Ultrasonic cleaning is one of the most widely used areas of power ultrasound, which mainly utilizes the cavitation effect of ultrasonic waves in liquids. This kind of cavitation is due to the fact that the liquid molecules are sometimes stretched and sometimes compressed under the action of ultrasound, forming tiny gaps called "cavitation bubbles". Because the pressure difference between the inside and outside of the cavitation bubble is very large, it has a great impact when the cavitation bubble disappears. When the surface of the object to be cleaned is impacted by this force, all kinds of dirt adhering to the surface are peeled off, so as to achieve cleaning. the goal of. At the same time, ultrasonic waves can accelerate the dissolution and emulsification in the liquid. Therefore, after the ultrasonic cleaning process, the quality of the workpiece is good.

Advantages of ultrasonic cleaning
Ultrasonic cleaning uses the cavitation effect of ultrasonic in the liquid medium. The liquid medium physically cleans the inner and outer surfaces of the object wherever it goes. It has the characteristics of high quality, time saving, labor saving, high efficiency, no pollution and low operating cost, so ultrasonic cleaning It is especially suitable for cleaning workpieces with complex surface shapes, such as micro-holes, slits, grooves, and blind holes of precision workpieces. Conventional cleaning methods are difficult to achieve. Ultrasonic cleaning can achieve very ideal results.

Application areas of ultrasonic cleaning
Ultrasonic cleaning equipment can be found in all areas where you need industrial cleaning. It can be widely used in metal parts degreasing, polishing wax, electroplating, plastic electronics, automotive, medical, scientific experiments, optics and other industries.

Single tank ultrasonic cleaning machine uses clean water, alkaline or weakly acidic water-based solvents as cleaning agents, which are mainly used for cleaning before and after plating parts, as well as clock and watch parts, hardware and machinery parts, jewelry, lens and spectacle frames, glassware, Cleaning of semiconductor wafers, etc.

Product Features:
All stainless steel structure, acid and alkali resistance, beautiful appearance.
Using imported high-quality transducers and unique ultrasonic generators, ultrasonic waves are powerful and powerful.
Imported adhesive and unique bonding process are used to ensure that the transducer can work for a long time at a water temperature of 100°C and is durable.
Equipped with automatic temperature control heating device, temperature control range: normal temperature -100 ℃.
The ultrasonic generator and the cylinder have a separate structure, which is connected by a high-frequency wire seat.

Application scope:
(1) Machinery industry: removal of anti-rust grease; cleaning of measuring tools; degreasing and rust removal of mechanical parts; cleaning of engine carburetor and auto parts; dredging and cleaning of filters and screens, etc.
(2) Surface treatment industry: degreasing and rust removal before electroplating; cleaning before ion plating; phosphating treatment; removing carbon deposits and oxide scale; removing polishing paste; surface activation treatment of metal workpieces, etc.
(3) Instrument and meter industry: high cleanliness of precision parts, cleaning before assembly, etc.
(4) Electronic industry: Removal of rosin and solder spots on printed circuit boards; cleaning of mechanical and electronic parts such as high voltage contacts.
(5) Medical industry: cleaning, disinfection, sterilization of medical equipment, cleaning of laboratory utensils, etc.
(6) Semiconductor industry: high cleanliness cleaning of semiconductor wafers.
(7) Clocks and watches, decoration industry: remove sludge, dust, oxide layer, polishing paste, etc.
(8) Chemical and biological industries: cleaning and descaling of laboratory utensils.
(9) Optical industry: degreasing, sweating and dust removal of optical devices.
(10) Textile printing and dyeing industry: cleaning textile spindles, spinnerets, etc.
(11) Petrochemical industry: cleaning and dredging of metal filter screens, cleaning of chemical containers, exchangers, etc.

40KHZ 800W Ultrasonic Filter Cleaner For Industry Electronic Components