40KHZ 400L 6000W Ultrasonic Mold Degreasing Oil Cleaning Machine

The mold is put into a cleaning tank equipped with cleaning medium, and through the cooperation of ultrasonic transducer and cleaning agent, at high temperature (select the temperature according to the type of residue and contaminants: 50-98℃), one-time thorough cleaning. The whole process only takes 10-30 minutes, and the mold can be used directly on-line.

The mold cleaning system is composed of a cleaning tank, an ultrasonic system, a heating system and a control system. It cleans and maintains aluminum-magnesium-zinc and its alloys, plastics and rubber industrial molds.

High-efficiency washing line
· No need to remove the mold
· No mechanical damage to the mold
· No abrasion, no sand blasting or shot blasting
· No separate degreasing and degreasing by wet sandblasting
· Long lasting cleaning effect
· Simple operation, no need for professionally trained workers

Multi-tank ultrasonic cleaning machine uses city water, pure water, alkaline or weak acid, water-based solvents as cleaning agents, and is often combined with cleaning methods such as spray, jet, hot dipping, bubbling, etc., with suitable product drying Way to form a semi-automatic ultrasonic cleaning production line. It is especially suitable for cleaning small batches of electronic circuit boards, electronic parts, watch parts, metal stamping parts, metal machining parts, jewelry, spectacle frames, glassware, semiconductor silicon wafers, etc. It has the characteristics of unique process, strong pertinence, simple structure, convenient use, etc., and the equipment is low in cost, low in investment, and can meet the special cleaning requirements of different products.
Cleaning process:
To remove the wax on the strap, use environmentally friendly wax cleaning agent.
Process flow:
One tank heating and soaking → two tank ultrasonic rough washing → three tank ultrasonic fine washing → four tank heating and rinsing → five tank heating and rinsing
Structural composition of washing machine
This system is mainly composed of heating tank, ultrasonic cleaning tank, ultrasonic generator, control shelf and generator electric box.
Functions and requirements of each slot
Equipped with one-piece tank design. The appearance size of the device is about 3110*600*780 mm. The bottom of the device is
It is welded by thick 50*50 stainless steel square tube, and 6 3-inch solid casters are installed at the bottom. The heating temperature control part is directly installed in the sink
The outer wall is easy to operate. The size of the control shelf is about 1400 mm (height) * 450 * 450 width, and 4 ultrasonic generators are placed. The connecting line between the generator of the control frame and the tank is 2 meters. The total power of the whole machine: 18KW, and the voltage is 380V.

40KHZ 400L 6000W Ultrasonic Mold Degreasing Oil Cleaning Machine