1-4 Sets
$4,850.00
≥5 Sets
$4,650.00
28KHZ/40KHZ 1000W 18L Injection Mold Ultrasonic Cleaning
The mold ultrasonic cleaning machine is also called the electrolytic ultrasonic mold cleaning machine, which is a kind of electrolytic cleaning machine. The mold cleaning machine is mainly composed of an ultrasonic generator system, an electrolytic circuit system, a circulating filter system, a special gold type cleaning fluid and a water-based rust inhibitor. The ultrasonic cleaning machine uses a water-based solvent as a cleaning agent, which is mainly suitable for mold removal Cleaning of oil stains, dust removal, stripping agent and electroplating parts before and after plating. It has a good cleaning effect for the removal of oil stains on various hardware and mechanical parts.
Advantages of mold ultrasonic cleaning machine:
1. The electrolytic cleaning system emits gas to the metal surface, and uses the sauna cleaning effect to remove the dirt, impurities, and sundries on the metal surface. It can also completely remove resin components and moisture; through ultrasonic vibration, the dirt peels off and floats, and the metal is attached to the cathode. Even the dirt in the dead corner can be completely removed.
2. Restore the metal to the original copper-green color and restore the original beauty of the metal.
3. Even complex shapes can remove dirt.
4. It can achieve the purpose of cleaning and decontamination.
5. It has a good rust-removing and anti-rust effect.
6. Generally speaking, it takes about an hour to save time than manual cleaning.
7. It is more environmentally friendly and safer than using organic solvents.
8. It can greatly reduce the defect rate after washing.
9. This cleaning machine has a long service life, generally at least five years.
10. The purchase cost and use cost of the whole machine are relatively reasonable.
Electrolytic ultrasonic cleaning process description: gold type washing → running water washing → anti-rust project.
Principle of electrolytic mold cleaning machine: electrolysis is the process of chemical decomposition of substances under the action of electric current. During the electrolysis process, the dirt on the metal surface begins to fall off, and the peeling is accelerated under the impact of ultrasonic waves. The metal surface is stained with animal and vegetable oils, minerals Oil, paraffin, carbon deposit, oxide layer. Use electrolysis to remove these dirt. When the current passes through the mold electrolytic cleaning agent containing a special formula, oxygen is generated near the positive electrode of the electrolytic cell, and hydrogen is generated near the negative electrode. Put the metal parts to be cleaned into the positive electrode of the electrolytic cell, and there will be small particles on the metal surface during the electrolysis process. The hydrogen gas is produced, and these small bubbles promote the peeling of the dirt from the metal surface. Ultrasonic cleaning is a process in which a 40KHZ high-frequency power supply is used to convert the transducer from electrical energy to mechanical energy. During this process, the transducer transfers huge energy to the cleaning tank solution. , Generate positive and negative pressure zones in the liquid, forming tens of thousands of cavitation bubbles, which continuously form explosions, impact the surface of the cleaned metal object, and quickly remove the dirt on the metal surface. To achieve the cleaning of the mold and restore the mold True color
A cleaning company focusing on the mold industry, mainly for the mold industry to solve difficult cleaning problems such as gas, carbon deposits, high-temperature residues, oil, rust, etc., and to avoid damage to the mold during manual cleaning. Avotec ultrasonic electrolytic mold cleaning machine cleaning mold time It is fast and can also protect the mold repair function.
50L liter mold cleaning machine equipment
Model: Hardware mold cleaning machine
Use cleaning fluid: for the use of special mold cleaning fluid stock solution
Inner tank size: L×W×H (mm) 550×300×280
Dimensions: L×W×H (mm) 850×500×850 (approximately)
Ultrasonic generator: a set of built-in
Ultrasonic power: 900W
A set of electrolysis machine: voltage 0-15V, current 0-50A built-in electrolysis ultrasonic cleaning machine Cleaning process: electrolysis ultrasonic system is composed of ultrasonic generator system, electrolysis circuit system, circulating filter system, special gold type cleaning fluid and water-based rust inhibitor composition.
The electrolytic cleaning system emits gas to the metal surface, using the sauna effect to remove the dirt and impurities on the metal surface, and it can also completely remove the resin component; the dirt is peeled off by ultrasonic vibration, and the metal is attached to the cathode, even if it is quite Dirt in small corners can be completely removed
Restore the metal to its original beauty.
Even complex shapes can remove dirt.
Can completely clean and decontaminate.
Has a good rust removal and antirust effect.
It saves one hour of time than manual cleaning.
It is more environmentally friendly and safer than using organic solvents.
Greatly reduce the defective rate after washing.
Process: 1. Gold type washing → 2 running water washing → 3 anti-rust project.
Scope of application: metal plastic molds, precision molds, semiconductors, medical care, communications, auto parts, etc.
The role of electrolysis and ultrasound:
1. Using electrolysis, the object produces positive and negative molecules due to the action of electric current. Under the catalysis of oxygen and oxygen generated on the metal surface, the dirty parts are quickly decomposed, peeled off and surfaced.
2. Utilizing the cavitation effect of ultrasonic, countless small bubbles are generated to impact each other with the object, and the dust on the workpiece is impacted and blasted to automatically peel off the dirt.
3. Use a special solution to quickly decompose the dirt with sufficient chemical effect.
Cleaning effect:
1. Return the mold to its original gorgeous color.
2. Thoroughly remove any dirt on the mold surface.
3. Even any mold with complex shape can remove dirt.
4. Has a good anti-rust function.
5. Greatly reduce the product defect rate after mold cleaning
6. Compared with the traditional mold cleaning method, the cleaning operation time can be shortened to an astonishing degree, thus making the cleaning work easy, simple and efficient.
7. The combination of electrolysis and ultrasound makes cleaning easy and simple with a special solution. And keep the cleaning effect lasting and stable.
Type | Frequency (Khz) | Power(W) | Capacity(L) |
ARS-MJQXJ-18LTT | 28KHZ,40KHZ | 1000W | 18L |
ARS-MJQXJ-20LTT | 28KHZ,40KHZ | 1200W | 20L |
ARS-MJQXJ-30LTT | 28KHZ,40KHZ | 1500W | 30L |
ARS-MJQXJ-30LTT | 28KHZ,40KHZ | 1700W | 40L |
ARS-MJQXJ-50LTT | 28KHZ,40KHZ | 2500W | 50L |
ARS-MJQXJ-70LTT | 28KHZ,40KHZ | 3500W | 70L |
ARS-MJQXJ-80LTT | 28KHZ,40KHZ | 4000W | 80L |
ARS-MJQXJ-100LTT | 28KHZ,40KHZ | 5000W | 100L |
ARS-MJQXJ-115LTT | 28KHZ,40KHZ | 5000W | 115L |
ARS-MJQXJ-400LTT | 28KHZ,40KHZ | 6000W | 400L |
28KHZ/40KHZ 1000W 18L Injection Mold Ultrasonic Cleaning
Scan the QR code with your phone, or visit the URL