The mold ultrasonic cleaning machine is also called the electrolytic ultrasonic mold cleaning machine, which is a kind of electrolytic cleaning machine. The mold cleaning machine is mainly composed of an ultrasonic generator system, an electrolytic circuit system, a circulating filter system, a special gold type cleaning fluid and a water-based rust inhibitor. The ultrasonic cleaning machine uses a water-based solvent as a cleaning agent, which is mainly suitable for mold removal Cleaning of oil stains, dust removal, stripping agent and electroplating parts before and after plating. It has a good cleaning effect for the removal of oil stains on various hardware and mechanical parts.
Advantages of mold ultrasonic cleaning machine:
1. The electrolytic cleaning system emits gas to the metal surface, and uses the sauna cleaning effect to remove the dirt, impurities, and sundries on the metal surface. It can also completely remove resin components and moisture; through ultrasonic vibration, the dirt peels off and floats, and the metal is attached to the cathode. Even the dirt in the dead corner can be completely removed.
2. Restore the metal to the original copper-green color and restore the original beauty of the metal.
3. Even complex shapes can remove dirt.
4. It can achieve the purpose of cleaning and decontamination.
5. It has a good rust removal and antirust effect.
6. Generally speaking, it takes about an hour to save time than manual cleaning.
7. It is more environmentally friendly and safer than using organic solvents.
8. It can greatly reduce the defective rate after washing.
9. This cleaning machine has a long service life, generally at least five years.
10. The purchase cost and use cost of the whole machine are relatively reasonable.

1. Technical process: electrolytic cleaning → washing with city water → anti-rust
2. Main components: ultrasonic generating system, electrolytic circuit system, circulating filter system
   Working principle: Use the mold or the workpiece to be cleaned as the cathode (just put it in the cleaning frame), and use the standard electrode rod as the anode.
3. The use of electrolyzed water produces oxygen at the anode and hydrogen at the cathode. During the operation process, a large amount of hydrogen is generated on the surface of the workpiece, so that the dirt is quickly decomposed and peeled off from the surface of the workpiece; at the same time, the cavitation effect of ultrasonic waves is used to cause countless small bubbles to collide with the object. Impact blasting the dirt on the workpiece to automatically peel off the dirt.
   At the same time, the special cleaning liquid 102C is used to make the dirt decompose rapidly through a sufficient chemical reaction. In this way, even the difficult-to-clean parts, such as the grooves, grooves, corners, holes, holes, bites and other complicated parts inside the mold, will be cleaned cleanly, and the mold will show a brilliant metallic luster from the inside to the outside.
   The cleaned molds are rinsed with water, and then soaked with special water-based rust inhibitor for steel. This anti-rust agent can quickly remove the moisture on the surface of the mold and form a protection on the surface of the mold. After air-drying, it can be stored or reprocessed. Re-production will not produce carbides attached to the mold.
4. Scope of application: plastic molds, hardware molds, optical mirror molds, rubber molds, medical equipment, auto parts molds, etc.
   Note: Various non-standard models and sizes can be customized according to customer requirements.