20KHZ 25KHZ 28KHZ 33KHZ 40KHZ 2500W Multi Tanks Digital Ultrasonic Cleaner  For Industrial Parts

The principle and knowledge of how the multi-tank ultrasonic cleaner works. The principle of ultrasonic cleaning machine is mainly to convert the sound energy of the power ultrasonic frequency source into mechanical vibration through the transducer, and radiate the cleaning liquid in the tank to ultrasonic waves through the cleaning tank wall. Due to the radiated ultrasonic waves, the microbubbles in the liquid in the tank can maintain vibration under the action of sound waves.
When the sound pressure or sound intensity reaches a certain level, the bubble will expand rapidly and then suddenly close. During this process, the shock wave is generated at the moment when the bubble is closed, causing a pressure of 1012-1013pa and local temperature adjustment around the bubble. The huge pressure generated by this ultrasonic cavitation can destroy insoluble dirt and make them differentiate in the solution. The direct and repeated impact of steam-type cavitation on dirt.
On the one hand, it destroys the adsorption of the dirt and the surface of the cleaning part, and on the other hand, it can cause the fatigue damage of the dirt layer and be dismissed. The vibration of the gas bubble scrubs the solid surface. Once the dirt layer is cracked, the bubbles are immediately " The “drilling” vibration causes the dirt layer to fall off. Due to cavitation, the two liquids are rapidly dispersed and emulsified at the interface. When the solid particles are wrapped in oil and adhere to the surface of the cleaning part, the oil is emulsified and the solid particles fall off by themselves. When it propagates in the cleaning liquid, it will produce positive and negative alternating sound pressure, forming a jet, which impacts the cleaning part. At the same time, due to the nonlinear effect, it will produce acoustic and micro-acoustic flow. Ultrasonic cavitation will produce high-speed at the solid-liquid interface. Microjets, all of these effects, can destroy dirt, remove or weaken the boundary dirt layer, increase stirring and diffusion, accelerate the dissolution of soluble dirt, and strengthen the cleaning effect of chemical cleaning agents. It can be seen that any place where the liquid can be immersed and the sound field has a cleaning effect, and its characteristics are suitable for cleaning parts with very complicated surface shapes. Especially after adopting this technology, the amount of chemical solvents can be reduced, thereby greatly reducing environmental pollution.

Multi-tank ultrasonic cleaning machine is a three-tank multi-station cleaning machine, which is a new generation of environmentally friendly cleaning machine specially designed for electroplating and painting pretreatment. Any combination of multiple processes such as ultrasonic cleaning, rinsing, spraying, and drying can be selected. This machine adopts a new generation of water-based environmental protection solution, no erosion, no pollution, better cleaning effect, so that the electroplating layer and spray paint layer are more reliable. It can also be equipped with an automatic hoisting transmission device according to user requirements, which is safer, more reliable and faster to clean the workstation.
Trough ultrasonic cleaning machine system The cleaning system of this series has the following characteristics:
1. All stainless steel structure, beautiful appearance, compact and reasonable structure.
2. Set up the liquid level safety control system to ensure the normal operation of the equipment.
3. Set up a filter system to ensure the cleanliness of the solution.
4. Heating and automatic constant temperature system, the constant temperature range is 20℃-90℃ (adjustable).
5. Use water to heat an appropriate amount of cleaning agent as the cleaning solution, with low cost and mature technology.
6. The unique overflow design ensures that there is sufficient water level, and the dirt floating on the water surface is constantly overflowed.

Features:
This equipment can realize the functions of product demagnetization, cleaning, rust prevention, etc.
Each cleaning tank is designed into a tapered structure and has a sewage outlet for easy brushing and cleaning;
Fully enclosed structure, the equipment is equipped with a ventilation and mist suction device to improve the working environment;
The equipment is fully automatic controlled by PLC and touch screen, with self-diagnosis and alarm function to ensure that the equipment is protected from damage and timely troubleshooting. The overall design is beautiful and generous, easy to operate, safe and reliable.

Ultrasonic Electrolysis Mold Cleaning Machine

20KHZ 25KHZ 28KHZ 33KHZ 40KHZ 2500W Multi Tanks Digital Ultrasonic Cleaner  For Industrial Parts