1-9 Units
$560.00
10-49 Units
$530.00
≥50 Units
$500.00
Steel Cleaning Bath Source Generator Ultrasonic Bath Generator RS485 4000W Industrial Ultrasound Waveform Sonicator
With this development of modern industry, ultrasonic cleaning equipment requirements are more stringent, the need for more powerful and more flexible control of ultrasonic cleaning system. My company is the need to develop in order to meet these network ultrasonic cleaning system.
Ultrasonic power is often referred to as an ultrasonic source, an ultrasonic generator. Its function is to convert electrical energy into a high frequency alternating current signal that matches the ultrasonic transducer. From the form of the amplifying circuit, a linear amplifying circuit and a switching power supply circuit can be used, and the high-power ultrasonic power source generally adopts a circuit form of a switching power supply in terms of conversion efficiency. Linear power supplies also have their own range of applications. It has the advantage of not requiring strict circuit matching and allowing continuous and rapid changes in operating frequency. From the current situation in the ultrasound industry, ultrasound is mainly divided into self-excited and its exciting power supply.
Network physical layer using RS485 communication interface, using MODBUS protocol layer protocol. In order to facilitate the realization of the network and the information needs of ultrasonic cleaning system.
Main technical index:
Operating voltage:220V 10%
Working current: Please note that the equipment can not run over the rated current for a long time
Rated power | 600W | 900W | 1200W | 1500W | 1800W | 2000W |
Rated current | 2.5A | 3.5A | 4.5A | 5A-5.5A | 6A-6.5A | 6.5A-7A |
Ambient temperature:0-45℃ Relative humidity:40%-90%
working frequency:160KHz below
Power control range:0-100% by manual 16 grade, automatic 32-level power adjustment
Machine overheating protection:65℃ Dimensions:H x W x L = 130 x 270 x 380
Panel function description:
1. display window: display work frequency, current size, power level, working condition and fault condition.(Start / stop: control ultrasonic start and stop, automatic check after long press 2 seconds.)
1. constant current / sweep frequency: set constant current value and switch frequency sweep status [factory mode confirm this entry to next item].
2. plus: time plus time (setting the display time "XX.XX").
3. time minus: time timed minus (set display "ON/OFF").
4. Power Plus: increase the output power (set the display current "XX.XA").
5. power subtraction: reduce output power (set the display frequency "FX.XX").
power switch: control the 220V voltage.
Note: in this note, "X" is shown in the content, and others are letters. Following same.
Type | Power | Frequency Adjustable |
|
ARS-RSDY1000W | 1000W | 20-40KHZ | |
ARS-RSDY3000W | 3000W | 20-40KHZ | |
ARS-RSDY4000W | 4000W | 20-40KHZ | |
ARS-RSDY5000W | 5000W | 20-40KHZ | |
ARS-RSDY6000W | 6000W | 20-40KHZ | |
ARS-RSDY8000W | 8000W | 20-40KHZ | |
ARS-RSDY9000W | 9000W | 20-40KHZ | |
ARS-RSDY10000W | 10000W | 20-40KHZ | |
ARS-RSDY12000W | 12000W | 20-40KHZ | |
ARS-RSDY15000W | 15000W | 20-40KHZ | |
ARS-RSDY20000W | 20000W | 20-40KHZ | |
Above ultrasonic generator 110V-120V or 220V-240V are available,contact with us during your order with detail request
|
Scan the QR code with your phone, or visit the URL