Vibration Wave Piezo Ultrasonic Cleaning Transducer 33K/80K/135K 40W Industry Ultrasonic Transducer/Sensor As Cleaner Module
  • Item No.ARS-QXHNQ4033/80/135 P4
    MOQ1 Piece / Pieces
    description

    Vibration Wave Piezo Ultrasonic Cleaning Transducer 33K/80K/135K 40W Industry Ultrasonic Transducer/Sensor As Cleaner Module

    02Specification

    The transducer is an energy converter, which can converted the high frequency, high power current, output of power supply into reciprocating mechanical energy of the ultrasonic vibration, the vibration frequency output of drive power with the same frequency as the current. To further enlarge the amplitude of ultrasonic energy input to the place where we need. 

    Ultrasonic atomization is a very conventional method to produce sprays of very small droplets. Resulting droplet size distributions are very narrow and the mean diameter is essentially only controlled by the excitation frequency.

     

    Ultrasonic Transducer classification:

    A. piezoelectric chip classification: Black chip P4 series and yellow chip P8 series;

    B. Frequency classification: low frequency series (17-23KHz), intermediate frequency series (25-28KHz), medium and high frequency series (33-60KHz) and high frequency series (68-200KHz)

    C. Power classification: 30W series (including 35W), 50W series (including 60W), 100W series (including 80W) and other unconventional power;

    D. shape classification: straight column and horn type

     

    Ultrasonic Transducer Frequency selection: 

    The frequency of the transducer is inversely proportional to the wavelength, and the wavelength is related to the diameter of the cavity (strictly speaking, the nucleation time is longer due to the low frequency), and the diameter of the cavity is related to the explosion pressure. The higher the general frequency, the smaller the wavelength, the smaller the diameter of the cavity, the lower the explosion pressure, but the higher the density of the cavity, the better the permeability.

     

    Based on the above principles:

    Low frequency (17 ~ 23KHz): When the dirt of the cleaned material is heavy or difficult to be cleaned, and the explosive impact does not cause much damage to the surface of the cleaned material, the low frequency series transducer should be selected. Commonly used industries are: magnetic industry, steam protection industry, textile industry and so on. Note that the noise of this series is large, preferably sound insulation.

     

    Medium frequency (25 ~ 28KHz): If the dirt of the cleaned material is slightly heavy or the cleaning is difficult and moderate, and the explosive impact does not cause much damage to the surface of the cleaned material, the intermediate frequency series transducer should be selected. This series of industries are the most widely used, and are common in machinery processing industry, electroplating industry, catering industry and so on.

     

    Medium and high frequency (33 ~ 60KHz): When the dirt of the cleaned material is light, the cleaning is easy, or the explosive shock damage to the surface of the cleaned material is required, the medium and high frequency series transducer should be selected. Commonly used industries include precision parts, glass glasses, electronic components, circuit boards, etc.

     

    High Frequency (68-200KHz): The dirt is very light and easy to clean. When the explosive impact is prohibited to damage the surface of the cleaned object, the high frequency series transducer should be selected. Commonly used industries are semiconductors, special high-precision parts, etc.

     

    Specification List 
    ModelFrequency  Capacitance

    Resonance

     Impedance

       Size Power

     Insulation

     resistance

    (KHz)(pF)(Ω)

     Radiation head*Height

     (mm)

    (W)(2500VDC)
    ARS-8SE-3828/4028/40±1.03800±10%≤30Ω65*7060w≥100MΩ
    ARS-8QXHNQ-2540/13040/130±2.03100±10%≤30Ω25*5820w≥100MΩ
    ARS-4QXHNQ-3840/6838/66±2.04800±10%≤20Ω50*6550w≥100MΩ
    ARS-4QXHNQ-3840/80/13038/79/128±2.04200±10%≤25Ω40*5460w≥100MΩ
    ARS-4QXHNQ-3840/60/8038/65/84±2.04800±10%≤25Ω40*5460w≥100MΩ
    ARS-8QXHNQ-5020/40/6020/40/60±2.05200±10%≤25Ω78*94120w≥100MΩ
    ARS-4QXHNQ-3840/100/16038/100/160±2.04800±10%≤25Ω40*5760w≥100MΩ
    Screw hole size (diameter * pitch * depth)M10*1.0*10

     

    33K/80K/135K Multi Frequency Ultrasonic Cleaning Transducer,Ultrasonic Vibration Transducer,Piezoelectric Emitters
    04Product display

    IMG_1110.jpgIMG_1168.jpgIMG_1001 .JPG

    .jpg

    The Process Flow_01

    Why choose us and About usCertificationShiping and Packing.jpg

    Shiping.jpg

    Transducer packing.jpg

     

     FAQ

    Have more questions about this product?

    Scan the QR code with your phone, or visit the URL

    https://www.digitalultrasoniccleaner.com/

    Have more questions about this product?
    • 506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen China
    • 86-13662219669
    • [email protected]