1-499 Pieces
$15.00
500-999 Pieces
$14.00
≥1000 Pieces
$12.00
40K80K100K 60W Multi-Frequency Ultrasonic Piezo Transducer Cleaner Vibration Ultrasonic Transducer For Auto Parts Cleaning
The transducer is an energy converter, which can converted the high frequency, high power current, output of power supply into reciprocating mechanical energy of the ultrasonic vibration, the vibration frequency output of drive power with the same frequency as the current. To further enlarge the amplitude of ultrasonic energy input to the place where we need. Ultrasonic cleaning has become more and more widely used in various industries, agriculture, household equipment, electronics, automobile, rubber, printing, aircraft, food, hospital and medical research.
Ultrasonic Transducer Frequency selection
The frequency of the transducer is inversely proportional to the wavelength, and the wavelength is related to the diameter of the cavity (strictly speaking, the nucleation time is longer due to the low frequency), and the diameter of the cavity is related to the explosion pressure. The higher the general frequency, the smaller the wavelength, the smaller the diameter of the cavity, the lower the explosion pressure, but the higher the density of the cavity, the better the permeability.
Based on the above principles:
Low frequency (17 ~ 23KHz): When the dirt of the cleaned material is heavy or difficult to be cleaned, and the explosive impact does not cause much damage to the surface of the cleaned material, the low frequency series transducer should be selected. Commonly used industries are: magnetic industry, steam protection industry, textile industry and so on. Note that the noise of this series is large, preferably sound insulation.
Medium frequency (25 ~ 28KHz): If the dirt of the cleaned material is slightly heavy or the cleaning is difficult and moderate, and the explosive impact does not cause much damage to the surface of the cleaned material, the intermediate frequency series transducer should be selected. This series of industries are the most widely used, and are common in machinery processing industry, electroplating industry, catering industry and so on.
Medium and high frequency (33 ~ 60KHz): When the dirt of the cleaned material is light, the cleaning is easy, or the explosive shock damage to the surface of the cleaned material is required, the medium and high frequency series transducer should be selected. Commonly used industries include precision parts, glass glasses, electronic components, circuit boards, etc.
High Frequency (68-200KHz): The dirt is very light and easy to clean. When the explosive impact is prohibited to damage the surface of the cleaned object, the high frequency series transducer should be selected. Commonly used industries are semiconductors, special high-precision parts, etc.
Type | Full length(mm) | weight(g) | FR (khz) | impedance(Ω) | CP(Pf)±10% | power(w) |
ARS-38/80 KHZ P 4 | 61 | 330 | 38/80 | <35 | 4800 | 50 |
ARS-40/100KHZ P 4 | 54 | 280 | 41/100 | <50 | 5200 | 40 |
ARS-50K P4 | 42 | 135 | 50 | <35 | 3200 | 25 |
ARS-28/83/130 KHZ P 4 | 70 | 480 | 28/83/130 | <30 | 5000 | 30 |
ARS-25/45/80KHZ P4 | 78 | 540 | 25/45/80 | <30 | 5000 | 30 |
ARS-33/89/135KHZ P4 | 60 | 430 | 33/89/135 | <30 | 5000 | 40 |
ARS-28/41/123KHZ P4 | 68 | 630 | 28/41/123 | <35 | 6800 | 60 |
ARS-40/80/120K P4 | 56 | 260 | 120 | <35 | 5400 | 30 |
ARS-28/60/70/84KHZP4(quadruple frequency)60W70K | 81 | 465 | 28/50/60/70/84 | <35 | 5000 | 30 |
ARS--40/77/100/170KHZ P4 | 55 | 270 | 40/77/100/170 | <30 | 4000 | 30 |
60W 40Khz/80Khz/100Khz Tri-Frequency Ultrasonic Washer Parts Piezoelectric Ultrasonic Cleaning transducer
Scan the QR code with your phone, or visit the URL