20KHz 2000W Industry Ultrasonic Welding Machine For Plastic Fusion Welding Bonding PP Sheet Welder Nylon Fabric Filter Bag 

The ultrasonic welding machine is suitable for mobile shell welding, charger welding, CF card, battery shell welding, U disk welding, SD card welding, adapter welding, USB connector welding, Bluetooth welding, folder welding, photo album welding, watch welding, kitchen utensils welding, mobile accessories welding, gold brush welding, folding box welding. , PP hollow plate welding, pen sleeve welding, ink box welding, hanger welding etc. plastic products welding.

When the ultrasonic welding machine is turned on, it automatically searches for the resonance frequency of the vibrator and the welding head, detects the system power, detects the frequency range of the welding head, and whether the keys are out of order. Confirm the operating frequency and store the memory. Finally, determine whether the welding head current is too high. After confirming that it is normal, it will automatically release the start key lock of each part, otherwise the device cannot start normally.
First, the intelligent automatic frequency tracking four major characteristics of plastic welding machine:
1. Automatic frequency chasing: Intelligent frequency control system, avoiding the inconvenience of manual frequency adjustment, automatic detection of sonic overload, automatic adjustment to the working frequency band, real-time tracking of the working resonance point, the machine runs more stable, the vibration group temperature keeps the lowest point, the welding head The frequency changes following the temperature rise, and the machine adjusts automatically.
2. Stepless amplitude control: stepless amplitude control, in 5% increments, all large and small plastic parts can be welded, effectively reducing bad products such as punch through and burns
3. Contains three modes:
a. Time mode, precise time control, no time difference, the maximum time is 9.999 seconds, up to 1ms increments (thousandths of a second).
b. Depth mode, built-in grating ruler, accuracy is 0.01mm, welding distance can be set, which can effectively avoid the impact of air pressure, voltage instability, and height error of plastic parts on the final welding.
c. Power mode, welding reaches the set power and ends the wave
4, 4.3-inch touch screen display, digital input is simpler and more accurate than the old dial-type operation, the counter can enter the initial value for easy counting and memory. Chinese (English) interface operation (optional) facilitates foreign purchases.
Two or three intelligent protections:
The mold current is too high, the frequency offset is protected, the total output is protected, and the machine is escorted.

Features of the whole machine
1. casting aluminum alloy base, super thick seamless steel pipe column, rigid, no deformation under pressure.
2. with current overload protection, adjust the machine easily and conveniently.
3. original Japanese piezoceramic transducer, Huang steel alloy ultrasonic horn.
4. electronic frequency tracking, integrated alphabet circuit board

The advantages of automatic frequency tracking ultrasonic welding machine:
1, the manual frequency regulation is not convenient, automatic detection frequency is activated, and it is more convenient and simple to use.
2. The built-in parameters are digitized by computer, and the amplitude is automatically compensated. The amplitude and power of the load are magnified synchronously when the load is heavier. Thus, the transducer and the welding head die are effectively protected, and the welding precision is higher.
3, the power output adopts the digital stepless linear regulation. The output power is selected freely from 50% to 100%. The full bridge IGBT module is used to enlarge the internal power. The ultrasonic conversion rate is high and the maximum ultrasonic power can reach 7200W, which can meet the requirements of all kinds of welding.
4, more advanced protection circuit, output acoustic wave overload, die sudden rupture overload, built-in computer detection circuit in a very short time cut out the output, thus protecting the internal circuit;
5. High speed handover of up to 135 times per minute can be used to weld various non-standard automation equipment.
6, the operation interface can be selected in Chinese or English, and foreign purchasing is more convenient.
7, the electric box control wiring is very simple, the rear two air plug, the 30MM2 foot of the sound wave output, the 25MM7 foot starting switch and the quick stop switch, plug in the power can work; electric box volume smaller

Application
Used for toys, electronic, plastic bags and small rubber pieces of welding and forming.
Ultrasonic Welding designed for ABS/PE/PC/PS/PVC/PP material Ultrasonic welding;
ABS-PC complex welding,acrylic Ultrasonic welding etc,can weld the series products as below:

1.Toy Industry : toy gun, telephone, rag baby, general plastic toys.
2. Electronics: Glue watchcase, nylon strap, computer, sound box bag shell, mobile phone battery
3. Light industry: Rear lamp, cornering lamp, averting mirror, etc.
4. Packing industry: Cosmetic box, PVC box, toothpaste tubes, etc.
5. General commercial products: Typewriter ribbon, video box, tape box, computer disks, etc.

 20KHz 2000W Industry Ultrasonic Welding Machine For Plastic Fusion Welding Bonding PP Sheet Welder Nylon Fabric Filter Bag