High quality 12heads Ultrasonic Humidifier Mist Transducer Nebulizer for Farm Disinfection

The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:

1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.

2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.

3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.

4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.

5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.

6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.

7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.

8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.

The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:

1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.

2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.

The principle of ultrasonic atomization is to use electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the range of human hearing, and will not harm humans and animals). Through the high-frequency resonance of the atomizer, the water is thrown away from the water surface to produce a natural and elegant Water mist does not require heating or chemicals. During the atomization process, a large number of negative ions will be released, which will be combined with the floating smoke and dust in the air. The electrostatic treatment will precipitate and filter them, which can effectively remove harmful substances and odors such as formaldehyde, carbon monoxide and bacteria, and can prevent and treat decoration pollution. High concentration of negative ions can effectively kill harmful bacteria and viruses suspended in the air, purify the air and reduce the occurrence of diseases. During the atomization process, the negative ion particles can compensate the air humidity and improve the dry home environment or industrial environment.

Features of Ultrasonic Industrial Humidifier
1. The integrated atomization module is used inside, the chip can be replaced, and the maintenance is simple;
2. The diameter of the mist particles sprayed by the whole machine is less than 10uF;
3. The maximum relative humidity can reach 99%, adjustable and controllable, with temperature display;
4. Intelligent and accurate humidity control, using world-class probes, with a control accuracy of more than 3%
5. Flexible movement, convenient installation, can be moved and installed on the external wall;

[Notice of use]
1.When the atomizer is working properly, please do not put your hand above the atomizer spray chamber so as to prevent ultrasonic injury.
2.Atomizer must be in water to work properly, before use, please put it into the water, then put on the power supply, and to ensure that the surface of the atomizing piece is in water condition, so as not to damage the atomizer.
3.Switch off the power before you use the nebulizer, then remove the nebulizer from the water.
4.When using this atomizer, please choose the output power greater than 300W, the output voltage is DCV45 + 5 power supply.
5.When more than one provided using the same container, the need to pay attention to the atomizer shell are communicated each other, which do not use water line design solution and the wafer produce potential difference (electrolytic atomizer casing itself has charged) to prevent the generation of electric corrosion work (electric spark corrosion).
6.The fog produced by the atomizer must be forced out by the fan, and each group of nebulizer keeps the plane space of the 350CM2, so as to avoid the water temperature being too high and shorten the service life of the atomizer.
7.Atomizer is not suitable for atomizing corrosive liquid, so as not to damage the atomizer, metal shell and atomizing piece.
8.Please do not damage the water level induction switch during the installation so as to avoid the malfunction of the water level switch and cause the atomizer to be out of control. After the water level switch is damaged, it should be stopped. Otherwise, the atomizing disc will be dry burned, thus further damaging the atomizer. At this point should be repaired by professional maintenance personnel can use the rear.

High quality 12heads Ultrasonic Humidifier Mist Transducer Nebulizer for Farm Disinfection